Abstract:Positioning systems are used in a wide range of applications which require determining the position of an object in space, such as locating and tracking assets, people and goods; assisting navigation systems; and mapping. Indoor Positioning Systems (IPSs) are used where satellite and other outdoor positioning technologies lack precision or fail. Ultra-WideBand (UWB) technology is especially suitable for an IPS, as it operates under high data transfer rates over short distances and at low power densities, although signals tend to be disrupted by various objects. This paper presents a comprehensive study of the precision, failure, and accuracy of 2D IPSs based on UWB technology and a pseudo-range multilateration algorithm using Time Difference of Arrival (TDoA) signals. As a case study, the positioning of a 4×4m2 area, four anchors (transceivers), and one tag (receiver) are considered using bitcraze's Loco Positioning System. A Cramér-Rao Lower Bound analysis identifies the convex hull of the anchors as the region with highest precision, taking into account the anisotropic radiation pattern of the anchors' antennas as opposed to ideal signal distributions, while bifurcation envelopes containing the anchors are defined to bound the regions in which the IPS is predicted to fail. This allows the formulation of a so-called flyable area, defined as the intersection between the convex hull and the region outside the bifurcation envelopes. Finally, the static bias is measured after applying a built-in Extended Kalman Filter (EKF) and mapped using a Radial Basis Function Network (RBFN). A debiasing filter is then developed to improve the accuracy. Findings and developments are experimentally validated, with the IPS observed to fail near the anchors, precision around ±3cm, and accuracy improved by about 15cm for static and 5cm for dynamic measurements, on average.

Optimization of Time Synchronization and Algorithms with TDOA Based Indoor Positioning Technique for Internet of Things

An Indoor Ultrasonic Positioning System Based on TOA for Internet of Things

Design and Implementation of a Wireless Time Synchronization Based Positioning System

Range-Extension Algorithms and Strategies for TDOA Ultra-Wideband Positioning System

UWB Indoor Positioning Algorithm Based on TDOA Technology

Design and Implementation of Real-Time Localization System (RTLS) Based on UWB and TDoA Algorithm

Ultra-Precise Synchronization for TDoA-based Localization Using Signals of Opportunity

Ultraviolet Positioning via TDOA: Error Analysis and System Prototype

UWB Indoor Positioning Application Based on Kalman Filter and 3-D TOA Localization Algorithm

Finding the Right Place: Sensor Placement for UWB Time Difference of Arrival Localization in Cluttered Indoor Environments

High-Accuracy TDOA-Based Localization Without Time Synchronization

Analysis and Accuracy Improvement of UWB-TDoA-Based Indoor Positioning System

A Quadratic Programming Localization Based on TDOA Measurement

A KFL-TOA UWB indoor positioning method for complex environment

TDOA-TWR based positioning algorithm for UWB localization system

TOA Positioning for a TDMA Localization System

A Real-Time UWB Location and Tracking System Based on TWR-TDOA Estimation and a Simplified MPGA Layout Optimization

Indoor Localization With Distributed 5G Small Cells Considering Time Alignment Errors

Optimization of UWB indoor positioning based on hardware accelerated Fuzzy ISODATA

An Improved Algorithm for TDOA Trajectory Tracking