Abstract:The utilization of a lithium-cooled nuclear power supply system in conjunction with the He-Xe Brayton power system has great potential for providing power for space exploration missions. This is primarily attributed to its notable characteristics, such as high energy density, substantial output power, long-duration operation cycle, and little vulnerability to environmental factors. One of the salient concerns that necessitates attention is the phenomenon of heat transfer occurring between liquid lithium and a mixture of helium and xenon (He-Xe). The Vertical Cross-Flow Corrugated Plate Heat Exchanger (VC-CPHE) constructed from W-alloy possesses several advantages in space reactor applications compared to other heat exchangers. These include its compact design, which allows for a large heat exchange surface, as well as its ability to shield gamma-ray radiation. This paper investigates the thermal hydraulic properties of the VC-CPHE internal heat transfer medium using Computational Fluid Dynamics (CFD) techniques. The results indicate that, due to the similar flow channel structure of Li and He-Xe, there are similarities in terms of flow direction and periodic distribution of parameters. Nevertheless, due to the distinct thermophysical properties and operational parameters, these materials demonstrate notable disparities in temperature boundary layers, local thermal resistance, and other relevant factors. Furthermore, the optimization of VC-CPHE involves a balancing act between enhancing heat transfer efficacy and minimizing flow resistance. The VC-CPHE demonstrates optimal balanced performance when the inlet cross-angle is set at 45°. In comparison to Li, He-Xe exhibits elevated levels of thermal resistance and pressure loss. Hence, in the investigation of optimizing the corrugation pitch and inlet cross-angle, the optimal balanced size of corrugation pitch is 16mm and inlet cross-angle is 45° on He-Xe side is used as the final result. An increase in the inlet temperature difference of the heat exchanger leads to a slight decrease in the heat transfer coefficient, but an overall improvement in heat transfer. On the basis of obtaining the flow and heat transfer characteristics inside VC-CPHE, the effects of inlet cross-angle, corrugation pitch, and inlet temperature difference on the performance of VC-CPHE are discussed. The findings derived from the present study provide valuable insights for the future design and optimization of VC-CPHE systems in megawatt-class nuclear power deep space exploration spacecraft, particularly in relation to internal heat transfer.

Study on key parameters design of small helium xenon cooled reactor

Design of a He-Xe Gas-Cooled Nuclear Microreactor System Based on Detailed Models of the Cycle Components

Mass and efficiency optimization of a He-Xe Brayton cycle for mobile, land-based nuclear microreactors

Numerical and Theoretical Investigations of Heat Transfer Characteristics in Helium–Xenon Cooled Microreactor Core

Dynamic Modeling of a HeXe-Cooled Mobile Nuclear Reactor with Closed Brayton Cycle

The investigation of thermo-economic performance for dry-cooled closed Brayton cycle coupled to nuclear microreactors using different coolants

Preliminary Design and Neutronic Analysis of Prismatic High Temperature Gas-cooled Space Nuclear Reactor

Optimization of thermodynamic performance and mass evaluation for MW-class space nuclear reactor coupled with noble gas binary mixtures Brayton cycle

Simplified Reactor Model for Microreactor Coupled with Helium Closed Brayton Cycle

The Influence of Turbulators on the Flow and Heat Transfer Characteristic of Helium-Xenon Mixture Inside the Tight Lattice Rod Bundles

Study on Load Tracking Characteristics of Closed Brayton Conversion Liquid Metal Cooled Space Nuclear Power System

Dynamic simulation of a space lithium-cooled reactor system coupled with a He–Xe closed Brayton cycle

Key Parameters Effects and Design on Performances of Hydrogen/helium Heat Exchanger for SABRE

Effect of Induced Vortex and Configuration Layout on Heat Transfer Enhancement of Helium-Xenon Mixture

Parameter Study on Helium Cooled Ceramic Breeder Blanket Neutronics with CFETR Integration Design Platform

Numerical Study on the Purge Gas Flow and Heat Transfer Characteristics in Helium Cooled Solid Breeder Blanket of CFETR

Research and Development of Helium-Xenon Brayton Cycle Technology: a Review

A Review on Heat Transfer Characteristics and Enhanced Heat Transfer Technology for Helium-Xenon Gas Mixtures

Mass optimization of a recompression supercritical nitrous oxide and helium power system for space exploration

Dynamic Modelling and Control System Design of Micro-High-temperature Gas-Cooled Reactor with Helium Brayton Cycle

Numerical Investigation of Thermal-hydraulics Characteristics of Cross-Flow Corrugated Plate Heat Exchanger for Lithium-cooled Space Nuclear Reactor