Abstract:Supercritical water injection is a promising technology for heavy oil thermal recovery. Predicting and regulating the thermophysical parameters of supercritical water at bottomhole are the prerequisite for achieving high re-covery efficiency. In this paper, a novel numerical model was proposed to simulate wellbore flow and heat transfer of supercritical water injection. A modified correlation of frictional coefficient was developed to calculate water flow resistance near its critical point, where its properties change abruptly. The unsteady heat loss to the formation was calculated directly by solving two-dimensional unsteady heat conduction equations. They were respectively coupled in momentum and energy balance equations using an iterative scheme. This model was proved to be accurate by two oilfield cases in which the relative errors of wellbore fluid pressure and temperature are less than 1%. Then parameters sensitivity analysis of the injection pressure, temperature, mass flux and the apparent heat conductivity of insulating tube was conducted. The results indicated that the tem-perature variation of wellbore fluid depended on both enthalpy drop (or heat loss) and Joule-Thomson effect. An abnormal phenomenon that the fluid temperature increased with wellbore depth near the critical and pseudo -critical points was found because of the sudden increase in high heat capacity and Joule-Thomson coefficient of water. Raising the bottomhole fluid temperature was the key to enhanced oil recovery by supercritical water injection. Low apparent heat conductivity of insulating tube contributed richly to raise bottomhole fluid tem-perature by enlarging thermal resistance and reducing wellbore heat loss. There existed an optimal mass flux for maximizing bottomhole temperature, because when the mass flux increased, the shortened resident time within wellbore and the decreased fluid pressure favored temperature increase and decrease respectively. Selecting an injection pressure near the critical or pseudo-critical point and raising the injection temperature would increase the bottomhole temperature and reduce relative fluid heat loss.

Calculations of wellbore heat loss

Analysis on Heat Transfer and Steam Injection in the Wellbore and Calculation on Heat Loss

Study on the Effect of Wellbore Heat Capacity on Steam Injection Well Heat Loss

Heat and mass transfer behavior between wellbores and reservoirs

2D Transient Simulation of Conjugate Natural Convection and Radiation Within Thermal Wellbore Annuli

Study on Wellbore Heat Loss During Hot Water with Multiple Fluids Injection in Offshore Well

Insights into Heat Transport for Thermal Oil Recovery

Analysis for Flow and Heat Transfer of Thermal Recovery Well with Steam and Multiple Thermal Fluids Injection

Mathematical Modeling of Heat Transfer and Pressure Drops in the Single- and Dual-Pipe Horizontal Wells

Research and Application of Wellbore Temperature Field Models for Thermal Recovery Well in Offshore Heavy Oilfield

A novel analytical transient heat-conduction time function for heat transfer in steam injection wells considering the wellbore heat capacity

Numerical Simulation of Non-Isothermal Supercritical Water Flow in Ground Pipeline and Wellbore: an Interactive Sensitivity Analysis and Injection Parameters Optimization

Steam Cavity Expansion Model for Steam Flooding in Deep Heavy Oil Reservoirs

Wellbore heat-transfer modeling and applications

Numerical Simulation of Flow and Heat Transfer Performance During Supercritical Water Injection in Vertical Wellbore: A Parameter Sensitivity Analysis

Well Modelling Methods in Thermal Reservoir Simulation

An Approximate Solution for Predicting the Heat Extraction and Preventing Heat Loss from A Closed-Loop Geothermal Reservoir

Numerical Simulation of Natural Convection and Calculation of Heat Transfer Coefficient in Wellbore Annulus during Deep-Water Gas Well Testing

An improved thermal model for predicting wellbore temperature distribution in deep-water gas well

A Coupled Model of Two-Phase Fluid Flow and Heat Transfer to Transient Temperature Distribution and Seepage Characteristics for Water-Flooding Production Well with Multiple Pay Zones

Research on the Temperature Distribution in Electrically Heated Offshore Heavy Oil Wellbores