Abstract:In this article, the design and simulation of an optical gyroscope based on a hybrid ring resonator using the Sagnac effect are presented. In this design, by using a transfer matrix, numerical analysis, and tight-binding methods, as well as managing control factors in the sensor, such as the transfer coefficient, ring radius of each resonator, operating wavelength, and coupling coefficient, the sensor output parameters are investigated. The output parameters include sensitivity, angular random walk (ARW), minimum angular rotation, minimum group velocity, and the phase shift resulting from the power ratio changes. In this gyroscope, the maximum group velocity in terms of angular rotation with the increase of the number of rings is an exponential function in the range of 750–2500 m/s. The output phase changes as a linear function with an upward slope as the radius of the rigs increases in the range of 2130–3430 nm. Also, with the increase in the radius of the rings, the phase change relative to the operating wavelength decreases. By increasing the imaginary part of the coupling and transfer coefficients in this sensor, the changes in output power decrease compared to the output phase. The transmission peaks in the gyroscope output increase due to the rise in the number of rings. The sensitivity lowers with an increasing number of rings. The temperature affects the gyroscope output, and an increase in temperature causes a rise in ARW and a decrease in the signal-to-noise ratio. Also, the signal-to-noise ratio increases with the rise of the output power due to the transfer and coupling coefficients.

Optomechanical Gyroscope Simultaneously Estimating the Position of the Rotation Axis

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

A MICROMECHANICAL MODE-MATCHED GYROSCOPE USING STIFFNESS NONLINEARITY AND ELECTROSTATIC TUNING

Design and Analysis of Optomechanical Micro-Gyroscope for Angular-Vibration Detection

Synchronous In-Phase and Quadrature Demodulation Technique for Resonant Micro-Optic Gyroscope.

High-sensitivity Angular Velocity Measurement Based on Bidirectional Coupled Optoelectronic Oscillator

Synchronous Digital Quadrature Demodulation Technique For Resonant Optic Gyroscopes

Micro-Opto-Electro-Mechanical Gyroscope Based On The Talbot Effect Of A Single-Layer Near-Field Diffraction Grating

Resonator Fiber Optic Gyroscope with an All Digitalized System

IN-SITU MODE-MATCHING CONTROL FOR A SINGLE-CHIP HORIZONTAL DUAL-AXIS MEMS GYROSCOPE BASED ON MODULATING QUADRATURE COUPLING WITH SILICON GRATINGS

High-precision angular rate detection based on an optomechanical micro hemispherical shell resonator gyroscope

Simulation and test of a doubly decoupled lateral axis gyroscope

Enhanced Sensitivity of Optical Gyroscope in a Mechanical Parity-Time-symmetric System Based on Exceptional Point

Exceptional point enhanced optical gyroscope in mechanical PT-symmetric system

A Passive Non-Interference Scheme for Synchronously Measuring Multiple Parameters With Single Sensing Unit

Optimal Quantum Phase Estimation in an Atomic Gyroscope

The rotation sensing based on the Sagnac effect in silicon-integrated optical gyroscope with noise considerations

Optimal Design Of A Center Support Quadruple Mass Gyroscope (Csqmg)

Coupling rotational and translational motion via a continuous measurement in an optomechanical sphere

Mechanism Analysis and System Identification of the Quadrature Error in MEMS Gyroscope

Passive optical gyroscope with double homodyne readout