Comparative seismic analysis of frames with shape memory alloy slip friction dampers
Lizi Cheng,Canxing Qiu,Xiuli Du
DOI: https://doi.org/10.1016/j.jcsr.2024.108969
IF: 4.349
2024-08-19
Journal of Constructional Steel Research
Abstract:This study investigated the seismic performance of 6-, 9-, and 12-story concentrically braced steel frames utilizing shape memory alloy slip friction dampers (SMASFDFs). For comparison purposes, identical frames equipped with self-centering braces (SCBFs) and buckling-restrained braces (BRBFs) were also designed and analyzed. The seismic performance of considered frames was evaluated through nonlinear static and nonlinear time history analysis (NLTHA) under three seismic hazard levels, i.e., frequently occurred earthquakes (FOE), design basis earthquakes (DBE), and maximum considered earthquakes (MCE). Incremental dynamic analysis (IDA) was conducted to examine the seismic responses, including peak interstory drift ratios (PID), peak floor accelerations (PFA), and residual interstory drift ratios (RID), of the designed frames under varying levels of seismic intensity. Fragility curves considering single and multiple seismic responses were obtained based on the IDA results. The results show that the SMASFDFs have comparable deformation control capacity as the BRBFs while exhibiting zero RID and more uniform deformation distribution over the building height. Moreover, in most circumstances, the joint failure probability is lowest for the SMASFDFs when considering multiple seismic responses. From a seismic design perspective, current results suggest that the SMASFDFs can be designed with the same strength reduction factor ( R ) if the PID is especially concerned.
construction & building technology,engineering, civil