Abstract:This study focuses on catalytic co-pyrolysis of a lignocellulosic biomass (rice husk) and main components of the seaweed Enteromorpha clathrata (ie, protein, polysaccharide, and ash) using TGA and Py-GC/MS analytical techniques with the aim and novelty to unveil their catalytic co-pyrolysis thermal behaviors and synergistic effect of interactions between their catalytic co-pyrolysis volatiles for enhanced biofuels and high-valued chemicals production. Thus, in this study, rice husk was treated with macroalgal major components over ZSM-5, MCM-41, and blend of both catalysts using the Py-GC/MS analytical technique to improve the quality of rice husk bio-oil. Thermogravimetric analysis studies of pyrolysis, co-pyrolysis, and catalytic co-pyrolysis of lignocellulosic biomass with seaweed main components were also performed. Effects of HZSM-5, MCM-41, and blend of both catalysts on catalytic co-pyrolysis products distributions were also studied and compared. Results revealed that the quality and chemical compositions of rice husk bio-oil were significantly improved owing to the synergistic effect of interactions between volatiles of rice husk and seaweed main components during catalytic co-pyrolysis. Also, catalytic co-pyrolysis of macroalgal components and lignocellulosic biomass with ZSM-5, MCM-41, and blends of both catalysts were found to considerably reduce the oxygenated compounds, and greatly improved selectivity of monocyclic aromatic hydrocarbons in the bio-oil. However, MCM-41 offered a stronger positive upgrading effect than ZSM-5 catalyst. This could be attributed to its greater ability in raising the selectivity of aromatic hydrocarbons and reduction of activation energies of the degradation reactions. It was also observed that blends of both catalysts offered a higher upgrading effect than ZSM-5 and MCM-41 catalysts alone. Novelty StatementCatalytic c-pyrolysis of macroalgal components and lignocellulosic biomass with ZSM-5, MCM-41, and blends of these catalysts greatly improved selectivity of monocyclic aromatic hydrocarbons in the bio-oil.MCM-41 offered a stronger positive upgrading effect than ZSM-5 in raising the selectivity of aromatic hydrocarbons and reduction of activation energies.Blends of both catalysts offered a higher upgrading effect than ZSM-5 and MCM-41 catalysts alone. HighlightsCatalytic co-pyrolysis of lignocellulosic biomass with major macroalgal components was performed.Synergistic effect of catalytic co-pyrolysis of lignocellulosic biomass & macroalgal components were unveiled.Effect of HZSM-5 & MCM-41 catalysts on product distributions were studied & compared.Thermal behaviors and mass loss characteristics of degradation processes were unveiled.

Hydrothermal Co-Liquefaction of Rice Straw and Waste Cooking-Oil Model Compound for Bio-Crude Production

Co-liquefaction of swine manure and crude glycerol to bio-oil: model compound studies and reaction pathways.

Effect of lignin content on hydrothermal liquefication of biomass into oil

Co-treatment of swine manure and lignocellulosic biomass by liquefaction: parameter optimization, product characterization, reaction mechanism

Hydrothermal Liquefaction of Rice Straw with Nio Nanocatalyst for Bio-Oil Production

Co-liquefaction of mixed biomass feedstocks for bio-oil production: A critical review

In-depth Study of Synergism Between Torrefaction and Catalyst for Balanced Production of Bio-Oil from Rice Husk Pyrolysis Based on Hydrocarbons Production, Energy Yield and Deoxygenation Degree

Thermogravimetric-infrared analysis and performance optimization of co-pyrolysis of oily sludge and rice husks

Enhanced biocrude production from hydrothermal conversion of municipal sewage sludge via co-liquefaction with various model feedstocks

Hydrothermal co-liquefaction of microalgae, sugarcane bagasse, brewer's spent grain, and sludge from a paper recycling mill: Modeling and evaluation of biocrude and biochar yield

Effect of Fe, Ni, and Co on the hydrothermal liquefaction of Chinese herb residue for bio-oil production

Hydrothermal liquefaction of lignocellulosic biomass with potassium phosphate and iron and their binary mixture: A comprehensive investigation on the yields and compositions of biocrude and solid residue

Co-Cracking of Bio-Oil Model Compound Mixture and Ethanol with Different Blending Ratios for Bio-Gasoline Production

Optimisation of a catalytic hydrothermal liquefaction process using central composite design for yield improvement of bio-oil

Effect of glycerol as co-solvent on yields of bio-oil from rice straw through hydrothermal liquefaction.

Hydrothermal Liquefaction of Sugarcane Bagasse and Straw: Effect of Operational Conditions on Product Fractionation and Bio-Oil Composition

Co-hydrothermal carbonization of oil shale and rice husk: Combustion, pyrolysis characteristics, and synergistic effect

Microwave catalytic co-pyrolysis of Chlorella vulgaris and rice straw over Cu/X (X = activated carbon, HZSM-5): Characteristics and bio-oil analysis

Catalytic co‐pyrolysis of macroalgal components with lignocellulosic biomass for enhanced biofuels and high‐valued chemicals

Co-torrefaction of corncob and waste cooking oil coupled with fast co-pyrolysis for bio-oil production

Biogasoline Production by Co-Cracking of Model Compound Mixture of Bio-Oil and Ethanol over HSZM-5