Abstract:Porous structures are ubiquitous in many thermal management and energy conversion systems. The morphology of a porous structure has significant impact on the fluid flow, heat/mass transport, and strength performance. However, the available fabrication techniques are not capable of directly tailoring porous structures with well-controlled pore features and functional graded pore morphology, thereby limiting the performance enhancements for these systems. In this study, a triply periodic minimal surface (TPMS) based method was developed to customize the morphology of porous media with well-controlled pore features and to fabricate these parts with additive manufacturing. Porous structures with designed pore parameters were built based on the mathematically defined iWP surface, primitive surface, diamond surface and gyroid surface. Before performing flow and heat transfer simulations, morphological analysis was conducted to establish the connections between the geometrical parameters and the performance of the porous structure (flow resistance, heat transfer, and strength). The porous structures were compared in terms of their structural strength, specific pressure drop, interstitial/volumetric heat transfer coefficients and the ratio of the Colburn factor relative to the friction factor. The TPMS porous structures indicated that much higher strength than the simple cubic packing structure (approximation of sintered metal particles) due to their reasonable struct connectivity. Computations demonstrated that the type P structure had the lowest flow resistance and highest comprehensive heat transfer coefficient (j/f). The high specific surface area, continuous changes in the flow direction, periodic mixing/redistribution and flow acceleration contributed to the higher volumetric heat transfer coefficients in the type W/G structures.

Mechanical Response of Triply Periodic Minimal Surface Structures Manufactured by Selective Laser Melting with Composite Materials

An Experimental and Numerical Investigation of Compressive Response of Designed Schwarz Primitive Triply Periodic Minimal Surface with Non-Uniform Shell Thickness

Optimization Design, Mechanical Properties, and Energy Absorption Characteristics of Thin‐Walled Porous Structures Manufactured by Selective Laser Melting

Achieving Triply Periodic Minimal Surface Thin-Walled Structures by Micro Laser Powder Bed Fusion Process

Effective mechanical properties of additive manufactured triply periodic minimal surfaces: experimental and finite element study

Design and mechanical performances of stress adaptive porous structures based on triply period minimal surface

Compression and resilient behavior of graded triply periodic minimal surface structures with soft materials fabricated by fused filament fabrication

Energy Absorption and Deformation Behavior of 3D Printed Triply Periodic Minimal Surface Stainless Steel Cellular Structures under Compression

Microstructural features and compressive properties of SLM Ti6Al4V lattice structures

Topological and Mechanical Properties of Different Lattice Structures Based on Additive Manufacturing

Novel triply periodic minimal surfaces sandwich structures: Mechanical performance and failure analysis

Enhancement in the mechanical behaviour of a Schwarz Primitive periodic minimal surface lattice structure design

Effect of heat treatment on compression properties of the 316L diamond structure fabricated through selective laser melting

Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading

Finite element analysis of the mechanical properties of sheet- and skeleton-gyroid Ti6Al4V structures produced by laser powder bed fusion

Mechanical responses of sheet-based gyroid-type triply periodic minimal surface lattice structures fabricated using selective laser melting

Improved Mechanical Properties and Energy Absorption of BCC Lattice Structures with Triply Periodic Minimal Surfaces Fabricated by SLM

Effect of heat treatment on mechanical properties, failure modes and energy absorption characteristics of lattice skeleton and sheet structures fabricated by SLM

Respiratory reflex changes in the rat after toxic injury of the lungs with croton and turpentine oil.

Morphology, Flow and Heat Transfer in Triply Periodic Minimal Surface Based Porous Structures

A multilevel converter topology with common flying capacitors