Abstract:Multi‐metallic catalysts rely on the synergistic effect between metals to perform better catalytic effect in biomass hydrogenation experiments compared with mono‐metallic catalysts. A series of CuNiAl composite metal oxide catalysts promoted by silicotungstic acid (HSiW), which were prepared by co‐precipitation and impregnation methods, were characterized by powder X‐ray diffraction (XRD), N2‐physisorption, scanning electron microscope (SEM) and NH3 program temperature desorption (NH3‐TPD) and pyridine infrared adsorption (Py‐FTIR). Their catalytic performance was evaluated in the hydrogenation of levulinic acid (LA) to prepare γ‐valerolactone (GVL). The results showed that the addition of Cu could improve the hydrogenation activity of Ni, and the addition of HSiW could further increase the amount of acid sites in the catalysts. Both of them could enhance the conversion of LA to some extent. CuNiAl‐5SiW, the par excellence catalyst, relied on the synergistic interactions between metals as well as the Brønsted and Lewis acid active sites to show efficient hydrogenation performance. The CuNiAl‐5SiW catalyst demonstrated 96.9 % conversion of LA and more than 99 % selectivity to GVL under 2 hours of reaction time, 180 °C of reaction temperature, 3.0 MPa of initial hydrogen pressure and solvent‐free conditions. Multi‐metallic catalysts rely on the synergistic effect between metals to perform better catalytic effect in biomass hydrogenation experiments compared with mono‐metallic catalysts. A series of CuNiAl composite metal oxide catalysts promoted by silicotungstic acid (HSiW), which were prepared by co‐precipitation and impregnation methods, were characterized by powder X‐ray diffraction (XRD), N2‐physisorption, scanning electron microscope (SEM) and NH3 program temperature desorption (NH3‐TPD) and pyridine infrared adsorption (Py‐FTIR). Their catalytic performance was evaluated in the hydrogenation of levulinic acid (LA) to prepare γ‐valerolactone (GVL). The results showed that the addition of Cu could improve the hydrogenation activity of Ni, and the addition of HSiW could further increase the amount of acid sites in the catalysts. Both of them could enhance the conversion of LA to some extent. CuNiAl‐5SiW, the par excellence catalyst, relied on the synergistic interactions between metals as well as the Brønsted and Lewis acid active sites to show efficient hydrogenation performance. The CuNiAl‐5SiW catalyst demonstrated 96.9 % conversion of LA and more than 99 % selectivity to GVL under 2 hours of reaction time, 180 °C of reaction temperature, 3.0 MPa of initial hydrogen pressure and solvent‐free conditions.

Layered Double Hydroxide-Derived Bimetallic Ni-Cu Catalysts Prompted the Efficient Conversion of -Valerolactone to 2-Methyltetrahydrofuran

Highly efficient Ni-Mn/SiO<sub>2</sub> catalyst for the selective hydrogenation of biomass-derived levulinic acid to -valerolactone under mild conditions

Selective Production of gamma-Valerolactone and Valeric Acid in One-Pot Bifunctional Metal Catalysts

Hydrogenation of Levulinic Acid over Nickel Catalysts Supported on Aluminum Oxide to Prepare Γ-Valerolactone

Cu−Ni Bimetallic Hydroxide Catalyst for Efficient Electrochemical Conversion of 5‐hydroxymethylfurfural to 2,5‐furandicarboxylic Acid

Enhanced Catalytic Transfer Hydrogenation of Ethyl Levulinate to Γ-Valerolactone over a Robust Cu–Ni Bimetallic Catalyst

An Efficient and Reusable Bimetallic Ni3Fe NPs@C Catalyst for Selective Hydrogenation of Biomass-Derived Levulinic Acid to Γ-Valerolactone

Bimetallic NiCu Alloy Catalysts for Hydrogenation of Levulinic Acid

Selective Conversion of Levulinic Acid to Gamma-Valerolactone over Ni-based Catalysts: Impacts of Catalyst Formulation on Sintering of Nickel

Synthesis of Γ-Valerolactone from Ethyl Levulinate Hydrogenation and Ethyl 4-Hydroxypentanoate Lactonization over Supported Cu-Ni Bimetallic, Bifunctional Catalysts

Mechanistic Insights into the Solvent-Driven Adsorptive Hydrodeoxygenation of Biomass Derived Levulinate Acid/Ester to 2-Methyltetrahydrofuran over Bimetallic Cu–Ni Catalysts

One-pot conversion of biomass-derived levulinic acid to furanic biofuel 2-methyltetrahydrofuran over bimetallic NiCo/γ-Al2O3 catalysts

Ion-Exchange Synthesis of Surrounded CoNi@Al2O3 Catalyst for Levulinic Acid Hydrogenation to γ-Valerolactone under Mild Conditions

Hydrodeoxygenation of Levulinic Acid to γ-Valerolactone over Mesoporous Silica-Supported Cu-Ni Composite Catalysts

Selective Production of Γ-Valerolactone from Biomass-Derived Levulinic Acid over a Ni/CMK-3 Catalyst

Selective Production of γ-Valerolactone from Biomass-Derived Levulinic acid over Ni/CMK-3 catalyst

Catalytic Conversion of Biomass-Derived Levulinic Acid into Γ-Valerolactone Using Iridium Nanoparticles Supported on Carbon Nanotubes

Solvent‐Free Efficient Hydrogenation of Levulinic Acid over Silicotungstic Acid Promoting the Activity of CuNiAl Catalysts: A Synergistic Effect

High Specific Surface Area Silica Nanorod Supported Bimetallic NiCu Effectively Catalyzes Levulinic Acid Hydrogenation to γ-Valerolactone

New Method for Highly Efficient Conversion of Biomass-Derived Levulinic Acid to Γ-Valerolactone in Water Without Precious Metal Catalysts

Hierarchically porous single catalyst Ru/HPW/UiO-66 with synergistic acid/metal sites for one-pot catalytic synthesis of γ–Valerolactone