Influence of non-uniform inlet velocity and non-uniform temperature distribution on turbine blade

Xiuhe Zhang,Fang Chen

2019-01-01

Abstract:The turbine blade bears higher and higher temperature of upstream flow with the increasing requirements for the engine thrust. The heat resistance of turbine blades is a severe problem for the life of turbine blades. Therefore, it is essential to study the flow field and heat transfer of the blade to find better ways to improve the heat resistance of the turbine and increase the thrust of the engine. To better the efficiency of the turbine blades, researchers at home and abroad have conducted a lot of research on the heating of turbine blades under different working conditions and the aerodynamics of the flow field. In this paper, the numerical investigation which is studying the different radius ratio of swirl and hot streak using CFD 3D RANs solver with the k-ω turbulent model to get the distribution of non-uniform temperature and swirl on blades. The circumferential and radial temperature gradients at the exit of the combustion chamber increase the disturbance of the inlet flow field and increase the circumferential and swirl for the flow, i.e., there is a non-uniform velocity distribution in the non-uniform temperature and inlet flow. The computation model utilizes standard blade C3X, which sets one boundary layers and adopted Pave mesh. The results show that for turbine blades when there are swirls, and hot streak affect together, the fluid on the suction side is biased toward the hub, and the liquid on the pressure side is deflected toward the shroud. The larger the radius ratio of the swirl and the hot streaks(SHR), the more complex the flow field temperature around the blade is, and a local high-temperature region is formed near the hub of the blade. The larger the radius ratio of the swirl and the hot streak, the smaller the eddy viscosity in the flow field and the maximum eddy viscosity appears at the axial position of 0.2.