Numerical Investigation of Rotation Effects on the Flow and Heat Transfer on the Turbine Blade Tip Underside with Bleed Hole at Different Locations

Zhiqi Zhao,Lei Luo,Xiaoxu Kan,Dandan Qiu,Xun Zhou

DOI: https://doi.org/10.1115/gt2019-90789

2019-01-01

Heat Transfer

Abstract:High thermal load on the turbine blade tip surface leads to high temperature corrosion and severe structural damage. One common way is to deliver a part of coolant through bleed holes onto the tip portion for cooling purpose. In this study, numerical simulations are performed to investigate the effects of rotation on the internal tip heat transfer in a simplified rotating two-pass channel with a bleed hole, which is applicable to the internal cooling passage of typical gas turbine blade. The bleed hole is placed on the tip wall of a two-pass channel at different locations, i.e. the ratio of distance from the outlet-side wall to width of the tip wall is 0.07, 0.21, 0.5, 0.78, 0.93, respectively. A smooth channel without bleed hole is used as Baseline. The Reynolds number is fixed at 10,000. The Ro numbers are varied from 0 to 0.4. Results show that a three-dimensional vortex, which is induced by the Coriolis force, is found at the bend region. It transports the fluid from the trailing side to leading side, which is beneficial to enhance tip heat transfer. The middle-mounted hole shows a better heat transfer augmentation compared to other hole arrangement. The rotation have a notable effect on the heat transfer and flow structures. Compared to the smooth channel, the heat transfer augmentation is about 34%.