Abstract:Gas turbine engines play a crucial role in numerous industrial domains, including power generation, aviation, and marine propulsion. One of the major challenges in designing gas turbine engines is managing the high temperature generated by the combustion process. Internal cooling is a commonly used technique to maintain the temperature of critical components, such as turbine blades, within a safe operating range. Rib turbulators are widely used in internal cooling systems to enhance heat transfer performance by promoting turbulence in the fluid flow. Nevertheless, the existence of a continuous rib within the cooling channel can result in elevated temperatures near the rib section, potentially diminishing the overall system efficiency. In response to this challenge, a new rib turbulator design, denoted as the “separated rib,” has been introduced to mitigate the high-temperature zone. Through the utilization of the passing-gap design in the separated rib configuration, the coolant flow passes through the gap, effectively eliminating the region of extreme heat and augmenting the secondary flow. Consequently, it results in a notable enhancement of heat transfer performance within the ribbed channel. The numerical simulations are performed by solving three-dimensional (3D) Reynolds-averaged Navier–Stokes equations using the commercial software ANSYS CFX. The working fluid is steam, and the heat transfer performance is evaluated in terms of the Nusselt number (Nu), friction factor (f), and thermal performance factor (TPF). The results show that the separated rib configuration has approximately 17.3% higher Nusselt number than the original ribbed configuration when the Reynolds number (Re) changes from 5000 to 60 000. The separated rib configuration consistently shows higher TPF values between about 1.6 and 1.9 than the original rib configuration, where TPF is smaller than 1.35. Furthermore, the heat transfer correlation related to the Reynolds number was developed to predict heat transfer performance. The heat transfer correlations align closely with the numerical simulation results, showing about 17.4% and 34.3% improvements in Nu and TPF, respectively, for our newly designed system compared to the old version.

Aerothermodynamic Features of a Coriolis-applied Smooth U Channel for Gas Turbine Blade

Flow and Heat Transfer Characteristics of Coriolis-utilization Rotating Rectangular Smooth Cooling U-channel

Thermal and Flow Characteristics of a Double-paths V Ribbed U Channel

Evolution of Rotating Internal Channel for Heat Transfer Enhancement in a Gas Turbine Blade

Heat transfer and flow features of a Bifacial-enhanced U channel

Transpiration Cooling of High Pressure Turbine Vane with Optimized Porosity Distribution

A New Cooling Design for Rib Roughened Two-Pass Channel Having Positive Effects of Rotation on Heat Transfer Enhancement on Both Pressure and Suction Side Internal Walls of a Gas Turbine Blade

Numerical Investigation on Flow and Heat Transfer Mechanism of Corrugated Cooling Channel in Turbine Blades

Cooling Structure Optimization For A Rib-Roughed Channel In A Turbine Rotor Blade

Performance evaluation and enhancement of turbulent flow and convective heat transfer characteristics for turbine blade internal cooling

Influence of Rotation on Heat Transfer in a Two-Pass Channel With Impingement Under High Reynolds Number

An Experimental and Numerical Study on the Liquid Cooling of a Gas Turbine Blade

Conjugated heat transfer characteristics of ribbed-swirl cooling in turbine blade under rotation condition

Numerical Study On Local Heat Transfer In A Rotating Cooling Channel

Numerical investigation of the flows and heat transfer characteristics of internal cooling channels with separated ribs in gas turbine blades

Effect of wall curvature on heat transfer and hydrodynamics in a ribbed cooling passage

Experimental study on cooling performance of a steam-cooled turbine blade with five internal cooling smooth channels

Research Status and Development Trend of Rotating Internal Cooling of a Gas Turbine Blade

Fluid flow and heat transfer in a rectangular ribbed channel with a hierarchical design for turbine blade internal cooling

Heat transfer enhancement of return channel by using rib turbulator for a new impingement cooling scheme

Heat Transfer and Pressure Loss Simulations of Matrix Cooling Channels for Gas Turbine Airfoils