DIRECT NUMERICAL SIMULATION OF AN HPT STAGE: UNSTEADY BOUNDARY LAYER TRANSITION AND THE RESULTING FLOW STRUCTURES
Taiyang Wang,Yaomin Zhao,John Leggett,Richard D. Sandberg
DOI: https://doi.org/10.1115/1.4063510
2023-01-01
Journal of Turbomachinery
Abstract:In the present study, we investigate the unsteady boundary layer transition based on the direct numerical simulation (DNS) database of a high-pressure turbine (HPT) stage (Zhao and Sandberg, GT2021-58995), focusing on the transition mechanisms on the rotor blade, which are affected by the incoming periodic wakes and also by the background free-stream turbulence (FST) introduced at the inlet. Based on the fully-resolved DNS flow fields, we are able to provide detailed analysis of the flow structures responsible for the transition, and two distinctive paths to laminar-turbulent transition have been identified. The first path is the typical bypass transition via the instability of Klebanoff streaks, which happens when the transition region is not directly affected by the wake. It is noted that the suction-side boundary layer is disturbed at the leading edge, resulting in the formation of streamwise streaks. These streaky structures endure varicose instability in the region with adverse pressure-gradient (APG), then quickly break down into turbulent spots, which then evolves into fully turbulence. The other transition path is a consequence of the direct interaction between the wake structures and the blade boundary layer, when the wake apex starts to affect the transitional region. To be specific, the wake structures seem to directly interact with the separation bubble in the APG region, causing sudden break down into turbulence. The turbulent boundary layer induced by the periodic wake are usually followed by a calmed region as the wake travels away from the passage. It is also observed that the recovery to a calmed region can be impacted by the FST, as the calmed region in case with no FST is much longer compared to cases with stronger FST.