Abstract:High temperature proton exchange membrane fuel cells (HT-PEMFCs) can operate over 100 °C without humidification, which avoids the catalyst poisoning and enhances the efficiency of the power conversion. However, the classic phosphoric acid (PA) doped polybenzimidazole (PBI) still remains the challenge in the trade-off between mechanical strength and proton conductivity. The γ-(2,3-epoxypropoxy) propyltrimethoxysilane (KH560), as a crosslinking agent, is widely used to improve the mechanical properties of membranes. Although it can enhance the mechanical strength of PBI membranes, it sacrifices the hydrogen of imidazole groups, resulting in a decrease in proton conductivity. In this present work, silane-crosslinked PBI proton exchange membranes (PEMs) were synthesized by the reaction between the pyridine-bridged PBI containing different hydroxyl (-OH) content with KH560. Through comprehensive structural characterization of the polymer and model compound, it has been determined that this crosslinking method does not compromise the N–H acidic sites on the imidazole ring. The crosslinking agent KH560 provides additional hydroxyl groups to PBI and participates in the construction of hydrogen bonding networks after the ring-opening reaction. It was found that the addition of pyridine and hydroxyl groups could promote the phosphoric acid uptake, and the appropriate degree of silane crosslinking could maintain the PBI membranes with reasonable mechanical properties. Proton conductivity and HT-PEMFCs performance of the obtained crosslinked films were further enhanced with the dimensional stability, thermal stability and mechanical properties. Among them, CPyOPBI–OH–20 presented the best overall performance, exhibiting the highest proton conductivity of 0.095 S cm−1 and the maximum power density of 767 mW cm−2 at 180 °C under the anhydrous condition, which was 4.2 times that of OPBI (182 mW cm−2).

Polybenzimidazole-Based Semi-Interpenetrating Proton Exchange Membrane with Enhanced Stability and Excellent Performance for High-Temperature Proton Exchange Membrane Fuel Cells

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Diazoniabicyclo-type Poly (ionic Liquid) Cross-Linked Polybenzimidazole Membrane with Improved Phosphoric Acid Retention for HT-PEMFCs

HT-PEMs Based on Nitrogen-Heterocycle Decorated Poly (arylene Ether Ketone) with Enhanced Proton Conductivity and Excellent Stability

Polybenzimidazole Confined in Semi-Interpenetrating Networks of Crosslinked Poly (Arylene Ether Ketone) for High Temperature Proton Exchange Membrane

Gel-state Polybenzimidazole Proton Exchange Membranes with Flexible Alkyl Sulfonic Acid Side Chains for a Wider Operating Temperature Range (25–240 °C)

Ionically Crosslinked Composite Membranes from Polybenzimidazole and Sulfonated Poly (fluorenyl ether ketone) for High-Temperature PEM Fuel Cells

Construction of High-Performance, High-Temperature Proton Exchange Membranes through Incorporating SiO2 Nanoparticles into Novel Cross-linked Polybenzimidazole Networks

Fabrication of high performance high-temperature proton exchange membranes through constructing stable cation-rich domain in polybenzimidazole membrane

Composite Membranes Consisting of Acidic Carboxyl Containing Polyimide and Basic Polybenzimidazole for High Temperature Proton Exchange Membrane Fuel Cells

Highly Conductive and Mechanically Stable Imidazole-Rich Cross-Linked Networks for High-Temperature Proton Exchange Membrane Fuel Cells

Constructing novel cross-linked polybenzimidazole network for high-performance high-temperature proton exchange membrane

Poly(ionic liquid)/OPBI Composite Membrane with Excellent Chemical Stability for High-Temperature Proton Exchange Membrane

A Novel High Temperature Fuel Cell Proton Exchange Membrane with Nanoscale Phase Separation Structure Based on Crosslinked Polybenzimidazole with Poly(vinylbenzyl chloride)

Silane-crosslinked polybenzimidazole with different hydroxyl content for high-temperature proton exchange membrane

Monolithic Macromolecule Membrane Based on Polybenzimidazole: Achieving High Proton Conductivity and Low Fuel Permeability through Multiple Cross-Linking

Achieving high power density and excellent durability for high temperature proton exchange membrane fuel cells based on crosslinked branched polybenzimidazole and metal-organic frameworks

Cross-linked polybenzimidazole with enhanced stability for high temperature proton exchange membrane fuel cells

Polyoxometalate-Cross-Linked Proton Exchange Membranes with Post-Assembled Nanostructures for High-Temperature Proton Conduction