Abstract:In [1], the full width at half maximum (FWHM) value of 30 nm was wrongly reported. All the spectral simulations performed in the study were based on a FWHM of 50 nm. On page 420 in the first paragraph of the section "Optimization for a Daylight Simulator with a Fixed CCT", the sentence "To investigate the optimal channels of a daylight simulator containing n channels, the spectrum of each channel was simulated using a Gaussian distribution with a peak wavelength λj (j = 1,2…n) and a full width at half maximum (FWHM) of 30 nm, which is an average value of AlInGaP and AlGaInN LEDs.9" should be "To investigate the optimal channels of a daylight simulator containing n channels, the spectrum of each channel was simulated using a Gaussian distribution with a peak wavelength λj (j = 1,2…n) and a full width at half maximum (FWHM) of 50 nm. In comparison, the average FWHM value of AlInGaP and AlGaInN LEDs is around 30 nm.9". On page 423 in the last paragraph of the left column, the sentence "It was found that at least six LED channels (FWHM = 30 nm) are required to produce an AA-grade daylight simulator with a fixed CCT level." should be "It was found that at least six LED channels (FWHM = 50 nm) are required to produce an AA-grade daylight simulator with a fixed CCT level." We thank G He for bringing the errors to the attention of the authors.

Erratum To: Highly Efficient and Stable White LEDs Based on Pure Red Narrow Bandwidth Emission Triangular Carbon Quantum Dots for Wide-Color Gamut Backlight Displays

Stray light errors in spectral colour measurement and two rejection methods

Highly efficient fluorescent and hybrid white organic light-emitting diodes based on a bimolecular excited system: publisher's note

Erratum to “Ultra-Broadband Photonic Harmonic Mixer Based on Optical Comb Generation” [jan 1 2012 16-18]

Correction: Huang et al. High-Uniform and High-Efficient Color Conversion Nanoporous GaN-Based Micro-LED Display with Embedded Quantum Dots. Nanomaterials 2021, 11, 2696

Corrections to “zinc Oxide Nanostructures and High Electron Mobility Nanocomposite Thin Film Transistors” [nov 08 3001-3011

Polarization-Sensitive Perfect Absorbers At Near-Infrared Wavelengths: Erratum (Vol 21, Pg A111, 2013)

Erratum: Diarylboron-Based Asymmetric Red-Emitting Ir(III) Complex for Solution-Processed Phosphorescent Organic Light-Emitting Diode with External Quantum Efficiency above 28.

Correction: Hybrid 2D perovskite and red emitting carbon dot composite for improved stability and efficiency of LEDs

Correction: Surface Organic Ligand-Passivated Quantum Dots: Toward High-Performance Light-Emitting Diodes with Long Lifetimes

Author Correction: Ultra-thin high-efficiency mid-infraredtransmissive Huygens meta-optics

Correction: High-performance fluorescent organic electroluminescent devices benefit from sensitization of thermally activated delayed fluorescence

Corrigendum to “raman and Highly Ultraviolet Red-Shifted Near Band Edge Properties of LaCe-co-doped ZnO Nanoparticles” [acta Materialia 57 (2009) 4790–4796]

Corrections to “Silicon-Based 2-D Slab Photonic Crystal TM Polarizer at Telecommunication Wavelength” [15 Apr 08 641-643]

Optimization of a Spectral‐tunable LED Daylight Simulator

Correction: Highly stable color-tunable organic long-persistent luminescence from a single-component exciplex copolymer for in vitro antibacterial

Erratum to: On the voltage behavior of quantum dot light-emitting diode

Erratum: A Stable Quasi-Solid-state Dye-Sensitized Solar Cell with an Amphiphilic Ruthenium Sensitizer and Polymer Gel Electrolyte

Erratum to: Piezotronic effect on the luminescence of quantum dots for micro/nano-newton force measurement

Erratum: Cathodoluminescence Visualisation of Local Thickness Variations of GaAs/AlGaAs Quantum-Well Tubes on Nanowires (2020 Nanotechnology 31 424001)

High-performance Perovskite Photodetectors Based on CsPbBr3 Microwire Arrays: Erratum.