Abstract:The Al2O3-Y2O3 system composite coatings were prepared by plasma spraying Al2O3-Y2O3 composite powders with or without TiO2 addition. The effects of TiO2 on the microstructure and properties of the Al2O3-Y2O3 coatings were investigated. The results show that the composition of the composite powders had great influence on their microstructure evolution. The Al2O3-Y2O3 coatings were composed mainly of alpha-Al2O3 and c-Y2O3. There were amorphous phase, Y3Al5O12 (YAG) phase and Y4Al2O9 (YAM) phase formed in the Al2O3-Y2O3 coating. The content of Y3Al5O12 in the Al2O3-Y2O3-TiO2 coating increased with addition of 2 wt% TiO2, and the content of Y4A1209 and amorphous phases decreased correspondingly. There was no Y3Al5O12 formed in the Al2O3-Y2O3TiO2 coatings with further increasing of TiO2, while the content of amorphous phase increased. The micro hardness of the Al2O3-Y2O3-TiO2 coating was improved with the addition of 2 wt% TiO2, which was attributed to its lower porosity, more uniform microstructure, more YAG phase, and less amorphous phase. The microhardness of the AAl(2)O(3)-Y2O3-TiO2 coatings decreased significantly with further increasing of TiO2 due to the significant decrease of YAG phase and the increase of the amorphous phase. The Al2O3-Y2O3-TiO2 coating with addition of 2 wt% TiO2 possessed higher toughness, adhesive strength and wear resistance compared with the Al2O3-Y2O3 coating, which was due to its lower porosity, smaller and spherical pores, and more YAG phase.

Formation Mechanism of Al2O3‐YAG Amorphous Ceramic Coating Deposited Via Atmospheric Plasma Spraying

Non‐isothermal crystallization kinetics of Al2O3‐YAG amorphous ceramic coating deposited via plasma spraying

Microstructure and Phase Formation of Atmospheric Plasma Sprayed YAG Coatings

Excellent wear resistance of plasma-sprayed amorphous Al2O3–Y3Al5O12 ceramic coating

Crystallization behavior and thermal stability mechanism of plasma sprayed Al2O3-GAP amorphous ceramic coatings

Understanding the relationship between microstructure and mechanical behavior of plasma-sprayed amorphous Al2O3–YAG ceramic coating based on depth-sensing indentation measurements

In Situ Deposition of Amorphous Al2O3-GAP Ceramic Coating with Excellent Microstructure Stability and Uniformity via Atmospheric Plasma Spraying

Microstructure and Frictional Behavior of Fe-based Amorphous Metallic Coatings Prepared by Atmospheric Plasma Spraying

Microstructure and Properties of Al2O3-Y2O3 Ceramic Composite Coatings Fabricated by Plasma Spraying

Mechanism of vertical crack formation in Yb2SiO5 coatings deposited via plasma spray-physical vapor deposition

Fabrication and Microstructure of ZrO2/NiCrCoAlY Graded Coating by Plasma Spraying

Microstructure of Nano-structured ZrO2 Function Graded Thermal Barrier Coating Prepared by Atmospheric Plasma Spraying

Optimization on the bonding strength and microstructure of atmospheric plasma sprayed Y2O3 coatings by response surface methodology

Plasma Characteristics and Coating Microstructures of Yttria Stabilized Zirconia During Plasma Spray Physical Vapor Deposition

Deposition Characteristics, Sintering and Cmas Corrosion Resistance, and Mechanical Properties of Thermal Barrier Coatings by Atmospheric Plasma Spraying

Characterization of Nonmelted Particles and Molten Splats in Plasma-Sprayed Al2O3 Coatings by a Combination of Scanning Electron Microscopy, X-ray Diffraction Analysis, and Confocal Raman Analysis

Microstructure and Phase Composition Evolution of Dual-Phase Ytterbium Silicate Coatings Plasma Sprayed from Stoichiometric Yb2Si2O7 Feedstock Powder

Microstructure and Properties of Al2O3–ZrO2–Y2O3 Composite Coatings Prepared by Plasma Spraying

Formation Of Inter-Splat Bonding And Intra-Splat Microstructure During Plasma Spraying Of Ceramic Coating

Achieving improved compression plasticity/strength in plasma sprayed Al 2 O 3 –GAP amorphous ceramic coatings by regulating spray powder phase compositions