Abstract:In this paper, a numerical model is built considering the structure and operation characteristics of typical submerged combustion vaporizer. Based on this model, the flow and thermal performance of LNG in serpentine tube under supercritical pressure are predicted numerically, the impacts of operation parameters on thermal performance are analyzed, and 8 heat transfer correlations are introduced to evaluate the heat transfer of LNG in serpentine tube, which are compared with that of the simulation results. The simulation results reveal that there is a significant non-uniformity of heat transfer along the serpentine tube, especially in the bend sections, where the turbulent structure is rebuilt on account of the secondary flow and reverse flow resulting from the interaction of thermophysical properties and geometry configuration, leading to the remarkable variation on temperature and heat transfer coefficient. The pressure and heat flux play important roles on thermal performance of LNG under supercritical pressure in serpentine tube especially close to the pseudo-critical region. The simulation data is compared with that of 8 empirical heat transfer correlations, and the contrast results indicate that most of the correlations have just the similar trend with the calculation one, only Yamagata's correlation proximately conforms with the calculation results in large specific heat region, the reason for the non-conformance is that the correlations are suitable for straight tube without considering the effects caused by geometric configuration of bend region and reverse flow on heat transfer, so an adaptive correlation of serpentine tube is expected for the future studies.

Experimental Study on Heat Transfer in a Model of Submerged Combustion Vaporizer

Numerical simulation analysis of a heat transfer tube in SuperORV

Performance Analysis of Submerged Combustion Vaporizer

Component effect on the flow and heat transfer of supercritical liquefied natural gas in a submerged combustion vaporizer

A new heat transfer prediction method for supercritical liquefied natural gas in horizontal tubes

Influence of Inlet Mass Flow Rate on Heat Transfer of Supercritical Liquefied Natural Gas in Horizontal Tubes

Numerical Study on Shell-Side Saturated Boiling Heat Transfer in Spiral Wound Heat Exchanger

Numerical Simulation of Heat Transfer of Liquefied Natural Gas in Horizontal Circular Tubes under Supercritical Pressure

The Influence of Chemical Composition of LNG on the Supercritical Heat Transfer in an Intermediate Fluid Vaporizer

Numerical Investigation on Shear Flow and Boiling Heat Transfer on Shell-Side of LNG Spiral Wound Heat Exchanger

Research on shell-side heat and mass transfer with multi-component in LNG spiral-wound heat exchanger under sloshing conditions

Experimental Investigation on Downward Flow Boiling Heat Transfer Characteristics of Propane in Shell Side of LNG Spiral Wound Heat Exchanger

Fundamental Research on the Condensation Heat Transfer of the Hydrocarbon-Mixture Energy in a Spiral Tube Described by a Universal Model Using Flow Pattern Based and General Modes

Numerical Investigation on Condensation Heat Transfer Performance of Mixed Hydrocarbon Refrigerant in Spirally Tubes

Experimental and Simulation Investigation on Heat Transfer Characteristics of Supercritical Nitrogen in a New Rib Tube of Open Rack Vaporizer

Thermal Performance Calculation with Heat Transfer Correlations and Numerical Simulation Analysis for Typical LNG Open Rack Vaporizer

Numerical Study on the Shell-Side Flow and Heat Transfer of Superheated Vapor Flow in Spiral Wound Heat Exchanger under Rolling Working Conditions

Numerical Analysis on Heat Transfer of Supercritical Pressure LNG in Serpentine Tube

Simulation of Performance of Intermediate Fluid Vaporizer under Wide Operation Conditions

Design of Heat Exchange Area in LNG Participating Media Vaporizer

Numerical Study on Condensation Heat Transfer and Pressure Drop Characteristics of Methane Upward Flow in a Spiral Pipe under Sloshing Condition