Abstract:Piezoelectric energy harvesting from ambient vibration sources has great potential for powering microelectronic devices and wireless sensors. Almost all the conventional piezoelectric energy harvesters (CPEHs) in the literature have been designed with a single metallic layer as substrate along with the piezoelectric material bonded over it. In this work, a novel sandwich structure is used as substrate for designing harvester. The substrate structure comprises of a soft-core material sandwiched between metallic layers. The proposed sandwich piezoelectric energy harvester (SPEH) has lower resonant frequency and generates higher voltage output than the CPEH with the same geometrical dimension. Furthermore, the SPEH offers high design flexibility in terms of tuning the resonant frequency through selection of materials and geometric parameters for the core and metal layers. The mathematical formulation of a generalized electromechanical model of the SPEH is developed using the Lagrange approach. The natural frequencies, displacement and voltage frequency response functions of the harvester are obtained analytically. A single-degree-of-freedom model for the SPEH is also derived. Subsequently, the analytical modeling is validated by finite element simulations and experimental results. When excited at 0.1 g, the SPEH generates 18.8% more voltage output at resonance as compared with a CPEH with the same geometrical dimension and tip mass accompanied by 24% reduction in resonant frequency. At 30 Hz resonance frequency, CPEH generates open-circuit voltage 17.6 V using 15 g of tip mass whereas SPEH uses only 8.2 g of tip mass to generate 16.6 V.SPEH generates 130.8 mu W, 426.6 mu W and 1158.0 mu W at base accelerations 0.05 g, 0.1 g and 0.2 g with optimal resistance, respectively. Finally, the influence of geometric and material properties of core and metallic layers on the performance of SPEH are analyzed comprehensively. The proposed novel SPEH together with its analytical modeling is intended to serve as a basis for future sandwich harvester designs.

Gust Energy Harvesting of a Free-Flying Aircraft Model by CFD/CSD Simulation and Wind Tunnel Testing

Numerical study on gust energy harvesting with an efficient modal based fluid-structure interaction method

Modeling of Nonlinear Dynamic Characteristics and Experimental Study of Piezoelectric Energy Harvesters with a Panel Type Structure

Modeling and Analysis of Upright Piezoelectric Energy Harvester under Aerodynamic Vortex-induced Vibration

Piezoelectric energy harvesting from hybrid vibrations

Piezoelectric flutter energy harvesting: absolute nodal coordinate formulation model and wind tunnel experiment

An Innovative V-shaped Piezoelectric Energy Harvester for Wind Energy Based on the Fully Fluid-Solid-electric Coupling

Aeroacoustics-driven Jet-Stream Wind Energy Harvester Induced by Jet-Edge-resonator

Design, fabrication and characterization of a wind-isolated galloping energy harvester via an embedded piezoelectric transducer

Enhancement of low-speed piezoelectric wind energy harvesting by bluff body shapes: Spindle-like and butterfly-like cross-sections

Theoretical Study of a Two-Degree-of-Freedom Piezoelectric Energy Harvester under Concurrent Aeroelastic and Base Excitation

Piezoelectric Galloping Energy Harvesting Enhanced by Topological Equivalent Aerodynamic Design

A fully-activated flapping foil in wind gust: Energy harvesting performance investigation

Modeling and Experimental Study of a Piezoelectric Energy Harvester from Vortex Shedding-Induced Vibration

A Bio-Inspired Bistable Piezoelectric Structure for Low-Frequency Energy Harvesting Applied to Reduce Stress Concentration

Energy Harvesting about Flexible Piezoelectric Material

Nonlinear Analysis of Piezoelectric Energy Harvesters from Ambient and Galloping Vibrations

Performance analysis of galloping-based piezoaeroelastic energy harvesters with different cross-section geometries

Wind Energy Harvesting Using Piezoelectric Macro Fiber Composites Based on Flutter Mode

Enhanced piezoelectric energy harvesting performance using trailing-edge flap

Sandwich Piezoelectric Energy Harvester: Analytical Modeling and Experimental Validation