Abstract:The development of smart Internet-of-Things (IoT) solutions requires sensor nodes to be placed at different locations of monitored structures. Wireless solutions are quite attractive because of their simplicity although requiring for local energy supply. In this context, this study investigates the influences of the predefined angle of attack on the piezoelectric energy harvesting based on transverse galloping of different bluff bodies. The investigation is based on a lumped electro-aero-mechanical model with linear electrical and mechanical properties and nonlinear aerodynamic forces evaluated using the quasi-steady theory. The performances of energy harvesters with six different bluff bodies are analyzed at various predefined angles of attack: four rectangular cross-sections with different width-to-height ratios (i.e., b/d), one trapezium section, and one equal angle section. The main purpose is to understand the sensitivity of various bluff body-based energy harvesters on the predefined angle of attack, and further suggest a bluff body-based energy harvester that is robust to the predefined angle of attack. The results show that the response is quite dependent on the characteristic of the electro-mechanical system and the bluff body cross-section and angle of attack. In all cases, the load resistance should be tuned to maximize energy production. The largest vibration amplitude (i.e., largest power output) is predicted for the rectangular bluff body with b/d = 1.0 at a 0 degrees angle of attack. However, its performances are quite dependent on the angle of attack, resulting in a zero-power output for an angle of attack exceeding 4 degrees. A rectangular bluff body with b/d within 1.62 to 2.5 exhibits a reduced energy production compared with b/d = 1.0 at a 0 degrees angle of attack but better robustness varying the angle of attack. Finally, the trapezium and the angle bluff bodies are not suitable for energy harvesting due to their very high onset velocities within the considered range of angles of attack.

Performance analysis of galloping-based piezoaeroelastic energy harvesters with different cross-section geometries

Influence of Predefined Angle of Attack on Piezoelectric Energy Harvesting from Transverse Galloping of Different Bluff Bodies

Power Generation from Galloping-based Piezoaeroelastic Energy Harvesters for Different Cross-Section Geometries

Nonlinear Analysis of Piezoelectric Energy Harvesters from Ambient and Galloping Vibrations

Piezoelectric energy harvesting from hybrid vibrations

Modeling and nonlinear analysis of piezoelectric energy harvesting from transverse galloping

Temperature impact on the performance of galloping-based piezoaeroelastic energy harvesters

Piezoelectric Galloping Energy Harvesting Enhanced by Topological Equivalent Aerodynamic Design

Analytical Solution And Optimal Design For Galloping-Based Piezoelectric Energy Harvesters

Nonlinear Analysis of Piezoelectric Wind Energy Harvesters with Different Geometrical Shapes

Energy harvesting from transverse galloping using a two-degree-of-freedom flow energy harvester

Electromechanical Decoupled Model for Cantilever-Beam Piezoelectric Energy Harvesters with Inductive-Resistive Circuits and Its Application in Galloping Mode

Environment coupled piezoelectric galloping wind energy harvesting

Nonlinear Characterization of Concurrent Energy Harvesting from Galloping and Base Excitations

Theoretical Modeling and Performance Analysis for Electromagnetic Energy Harvesting From Galloping

Piezoelectromagnetic Synergy Design and Performance Analysis for Wind Galloping Energy Harvester

Geometric Nonlinear Distributed Parameter Model for Cantilever-Beam Piezoelectric Energy Harvesters and Structural Dimension Analysis for Galloping Mode

Low Velocity Water Flow Energy Harvesting Using Vortex Induced Vibration and Galloping

Stochastic analysis of a galloping-random wind energy harvesting performance on a buoy platform

Optimization and Performance Comparison for Galloping-Based Piezoelectric Energy Harvesters with Alternating-Current and Direct-Current Interface Circuits

Improving the performance of galloping energy harvester with striped bluff body