Abstract:It is fundamentally important to investigate the interfacial friction between softened glass and rigid molds for controlling the product quality in glass hot forming techniques. However, the underlying mechanism has not been fully understood in terms of the contribution of viscous dissipation to the viscoelastic friction of softened glass. In this paper, a dry rotary sliding scheme using the ball-on-disc pair is employed to investigate the high-temperature friction characteristics of a typical borosilicate crown glass N-BK7 from 500 <math>°C</math> to 660 <math>°C</math>. Experimental results show that the friction coefficients in the steady stage remarkably increase with the applied temperatures. For softened glass, friction could originate from adhesion, ploughing and dissipation. Furthermore, with careful estimations on both the scratch deformation frequency and the induced flash temperature during sliding, the increase in friction coefficient with temperature is well correlated with the loss modulus ratio, which presents the viscous energy dissipation by macroscale ploughing. Additionally, the friction coefficients at 500 mm/s are slightly larger than those at 250 mm/s, because the effect of more frictional heat prevails. Lastly, the influences of temperature and frequency shifting on the loss modulus ratio are summarized to explain the experimental evolution of friction coefficient. It is confirmed for N-BK7 glass that the dependences of friction coefficients on temperature and sliding velocity, also follow the classical superposition master curve of viscoelastic friction.

The mechanical properties of K9 glass based on nano-scratch experiments

Size-Dependent Brittle-To-Ductile Transition in Silica Glass Nanofibers

Shock induced damage and damage threshold of optical K9 glass investigated by laser-driven shock wave

Investigation of laser induced damage on K9 glass surface using multi-pulse laser

Subsurface damage evaluation in the single abrasive scratching of BK7 glass by considering coupling effect of strain rate and temperature

Analysis of damage threshold of K9 glass irradiated by 248-nm KrF excimer laser

Femtosecond Laser Induced Darkening and Refractive Index Change in K9 Glass

Study On The Morphology Of Laser Induced Damage In K9 Glass By Focused Nanosecond Pulse

Laser Induced Damage Morphology of K9 Glass with Nanosecond Pulse

Bulk Damage of High Intensity Laser and K9 Optical Glass

Scratch-induced micro-fracture behaviour and translational failure of glass: An experimental and numerical study

Hardness and scratch resistance of chemically strengthened alkali‐borosilicate thin glass

Analytic Calculation and Evaluation of Thermal and Mechanical Damage in Optical Materials Induced by Laser

Predictive modeling and experimental study of polishing force for ultrasonic vibration-assisted polishing of K9 optical glass

Model for Predicting the Micro-Grinding Force of K9 Glass Based on Material Removal Mechanisms

High-temperature friction characteristics of N-BK7 glass and their correlation with viscoelastic loss modulus

Influence of laser focusing position on damage of K9 glass

Understanding the friction and wear of KDP crystals by nanoscratching

Simulation study on laser damage threshold of optical window materials

Metallic Nanoglasses with Promoted β-Relaxation and Tensile Plasticity

Research on damage mechanism of K9 glass irradiated by pulsed CO_2 laser based on simulate calculation