Abstract:Mechanical behaviors of a Ni-based single crystal superalloy have been investigated by tensile testing at various temperatures. Deformation substructures and mechanisms have been systemically revealed from micrometer to atomic scales by using advanced scanning electron and scanning transmission electron microscopes. Results show that deformation mode of the alloy strongly depends on the temperature due to competitive responses of the gamma and gamma' phases under mechanical loading and their original stress statuses. At temperatures from ambient to 750 degrees C, plasticity is governed by dislocation shearing in both phases, where slip modes of gamma are < 110 >{111} and those of gamma' are < 112 >{111}, < 110 >{111} and < 110 > {001}. At moderate temperatures (850 degrees C <= T <= 900 degrees C), plasticity mainly involves microscopically uniform deformation of both phases. The matrix deforms first so that channels parallel to tensile direction are narrowed due to the Poisson's effect, after that deformation of gamma' follows. The active slip modes are < 110 > {111} for gamma, < 112 >{111}, < 110 >{111}, < 110 >{001}, and < 001 >{001} for gamma'. At temperature higher than 1000 degrees C, plastic strain is also derived from deformation of both phases, but deformation of the matrix plays critical roles, due to relatively weak strength of this phase. The operative slip modes are < 110 > {111} for gamma, but mainly < 110 >{001} and < 001 >{001} for gamma'. Our results clearly provide a comprehensive and multiscale (from micrometer to atomic) understanding on the deformation mechanism of Ni-based superalloys, which can be critically beneficial and offer mechanistic guidelines to design new/next generation superalloys. (c) 2021 Elsevier Ltd. All rights reserved.

Microstructure and Tensile Behavior of a Novel Monocrystalline Co‐Based Superalloy at Different Temperatures

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Effect of microstructure on temperature dependence of deformation behavior in polycrystalline CoNi-based superalloy

Microstructure and Elevated Temperature Tensile Behaviour of Directionally Solidified Nickel Based Superalloy

In-Situ Study of High Temperature Tensile Fracture Mechanism of Mar-M247 Alloy

Microstructure and mechanical properties of a new Ni–Co based superalloy at intermediate temperatures

Plastic Deformation Behaviors and Mechanical Properties of Advanced Single Crystalline CoNi-base Superalloys

Yield strength anomaly evaluation of W-free Co-Ni-Al-based superalloys during high temperature tensile tests

The Temperature Dependence of High-Temperature Strength and Deformation Mechanism in a Single Crystal CoNi-base Superalloy

Hot deformation behavior and flow stress modeling of a novel CoNi-based wrought superalloy

Effect of Microstructure on High Temperature Mechanical Properties in Forming Ni-20cr-10mo-10co Superalloy

Temperature-Dependent Mechanical Behaviors and Deformation Mechanisms in a Si-Added Medium-Entropy Superalloy with L12 Precipitation

Effect of γ' phase and microtwins on the microstructural evolution and mechanical properties of a novel Ni–Co base superalloy

Anomalous Yield and Intermediate Temperature Brittleness Behaviors of Directionally Solidified Nickel-Based Superalloy

Microstructure and mechanical properties of a new nickel-based single crystal superalloy

Microstructures and Mechanical Properties of a L1 2 -structured precipitation Strengthened Co-based Superalloy

Microstructures and Tensile Properties of a Grain-size Gradient Nickel-based Superalloy

Hot deformation characteristics and dynamic recrystallization mechanisms of a Co–Ni-based superalloy

Tensile properties and deformation mechanisms of a new Ni–Co base superalloy from room temperature up to 750 °C

Hot Deformation Behavior and Recrystallization Mechanism in an As-Cast CoNi-Based Superalloy