Abstract:Rotating stall is a primary limit to compressor performance, and the reasonable estimation of stall-onset point is very useful in compressor design. Extensive investigations have been conducted in the past few decades to develop analytical models and numerical methods for stall-onset prediction, and much progress has been made in the understanding of flow mechanism for rotating stall. In spite of the robust prediction ability of stall-onset condition, the unsteady 3-D computations are still time-consuming for industrial applications. Analytical models are able to provide a fast estimation of compressor stall onset. However, empirical correlations are usually needed in the analytical models, which leads to a decrement in the accuracy and application scope of the models. Especially for high speed compressors, tip clearance effects hasn't been evaluated reasonably in the previous analytical models, which actually plays a very important role in determining the stall-onset point. Therefore, new analytical models accounting for tip clearance effects will be promising in estimating the stall-onset more precisely. It's the requirement for a new analytical model that motivates the present work.In the present work, the unsteady flow simulation of a transonic compressor rotor at near stall condition was performed to clarify the relations between tip clearance flow oscillations and compressor stall-onset in transonic axial compressor rotors. The interaction between tip clearance and incoming flow is simplified to a 2-D analogy of free-stream and counter-flow wall jet interaction. Momentum balance analysis is applied to identify the position of tip clearance/incoming flow interface, together with a prediction method of tip leakage vortex core trajectory. The effects of the in-passage shock on tip clearance/incoming flow interaction is taken into account by applying an upstream deflection of the interface, and this deflection is also observed in the computational flow field at near stall conditions. As a combination of the above-mentioned aspects, a model is proposed to define the critical point for tip clearance flow spillage from blade leading edge, which corresponds to the stall-onset point on compressor performance curves. Validations against numerical results prove that the model is capable of including tip clearance effects on stall-onset point. Parametric study of the model shows that blade tip offloads with increasing tip clearance, reducing the inverse momentum flux of tip clearance flow. As a result, the stalling flow coefficient appears to be less sensitive to tip clearance variation, which accords with the published experimental results.

Numerical Investigations on Aerodynamic Blockage Characteristics and Exit Blockage Prediction Model for Transonic Centrifugal Impellers

Validation and Analyses of QCR Correction Turbulence Model in Sub-/Super-sonic Inner Flows

Numerical investigations on tip leakage flow characteristics and vortex trajectory prediction model in centrifugal compressor

One-dimensional Modeling for Tip Clearance Leakage Vortex Trajectory and Stall-Onset Prediction in Subsonic Centrifugal Impellers

A numerical study on the tip clearance in an axial transonic compressor rotor

Numerical Investigation of Transonic Axial Compressor Rotor Flows Using an Improved Transition-Sensitized Turbulence Model

Influence of Tip Clearance on the Flow Field and Aerodynamic Performance of the Centrifugal Impeller

Numerical Investigation of Shock Effects on Performance and Flow Field in a Transonic Centrifugal Impeller

Numerical Analysis of Flow Structures in the Tip Region of a Transonic Centrifugal Impeller

An Improved Streamline Curvature Method for Centrifugal Compressor Performance

Influence of Geometrical Modeling on the Results of Numerical Prediction for the Centrifugal Compressor with Shrouded Impeller

An Aerodynamic Design and Numerical Investigation of Transonic Centrifugal Compressor Stage

An Improved Model for Tip Clearance Loss in Transonic Axial Compressors

The Influence of Blade Root Fillet and Blade Tip Clearance on the Aerodynamic Performance of a Transonic Axial Compressor

Numerical Studies on Application of Blended Blade and Endwall Technique on Transonic Centrifugal Compressor

Modeling For Tip Clearance Effects On Stall-Onset Condition In Transonic Axial Compressors

Numerical and Experimental Investigations of Tip Clearance Effects in a High-Flow-coefficient Centrifugal Compressor

Numerical Investigation of Tip Geometry on the Tip-clearance Flow Features of a Pump-jet Propulsor

NUMERICLE STUDY OF THE FLOW INSIDE THE NASA 'S LOW-SPEED CENTRIFUGAL COMPRESSOR IMPELLER

Effects of tip clearance on flow field and performance of a centrifugal compressor

Investigation of CFD Calculation Method of a Centrifugal Pump with Unshrouded Impeller