Abstract:The separator is a significant safety component inside the lithium-based battery. To design a higher-power-density system, a functional separator has attracted more attention. In our study, vinyl trimethoxysilane (VTMS) has been directly grafted onto a polyethylene (PE) separator by γ-irradiation. We have evaluated the performance of a PE separator grafted with VTMS (PE-g-SiH) and its basic hydrolysis separator (PE-g-SiO) in detail and have discussed the role of separator surface polarity in the ion transport process. The consequence shows that the lithium-ion transference number of the PE-g-SiO separator is 0.38, superior than 0.27 of a pure PE separator and 0.29 of a PE-g-SiH separator. It can be a reason that the LiCoO2/Li cell with a PE-g-SiO separator shows excellent cycle stability and rate performance. Furthermore, in the case of a PE-g-SiO separator, the Li/Li symmetric model possesses the lowest activation energy of 55.2 kJ mol–1, indicating that lithium ions migrate easily at the interface of electrodes and a separator filled with liquid electrolyte. It is attributed to the improved interaction between the separator wall and solvent, which is in favor of lithium-ion-selective transport. Hence, separator functionalization is expected to enhance the battery performance further.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00737?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00737</a>.Figure S1: Contact angle of a bare PE separator, PE-g-SiH separator, and PE-g-SiO separator with a liquid electrolyte. Figure S2: I–V curves of the SS/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator. Figure S3: Voltage–time curves of the Li/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator at the deposition capacity of 1.5 mAh cm–2 and the current density of 1.5 mA cm–2. Figure S4: Nyquist plots of LiCoO2/Li half-cells based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator after (a) rate performance and (b) cycle performance. Table S1: Characteristics of these separators (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00737/suppl_file/ae1c00737_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Separator Impregnated with Polyvinyl Alcohol to Simultaneously Improve Electrochemical Performances and Compression Resistance

Improving the Properties of HDPE Based Separators for Lithium Ion Batteries by Blending Block with Copolymer PE- B -PEG

Preparation and Characterization of PVDF/P（MMA-co-DMAEMA） Separators for Lithium Battery

Polyethylene Battery Separator with Auto‐shutdown Ability, Thermal Stability of 220°C, and Hydrophilic Surface Via Solid‐state Ultraviolet Irradiation

Synergistic effect of dispersant and wetting reagent on wettability, thermal Stability and electrochemical properties of PVDF-coating polyethylene separator for lithium-ion batteries

Cellulose microspheres enhanced polyvinyl alcohol separator for high-performance lithium-ion batteries

Composite MnCO3/PVDF-HFP Separator Towards High-Performance Lithium-Ion Batteries

PVDF/lithiated Sulfonated Poly (ether Ether Ketone) Blend Coated PE Separators for High-Performance Lithium Metal Batteries

High-performance polyethylene separators for lithium-ion batteries modified by phenolic resin

A Heatproof Electrospun PES/PVDF Composite Membrane As an Advanced Separator for Lithium‐ion Batteries

Composite of Polyvinylidene Fluoride–cellulose Acetate with Al(OH)3 As a Separator for High-Performance Lithium Ion Battery

Mechanically Reinforced PVdF/PMMA/SiO2 Composite Membrane and Its Electrochemical Properties As a Separator in Lithium‐Ion Batteries

An Enhanced Polyethylene/polyetherimide Composite Separator for High-Performance Lithium-Sulfur Battery

Polyhedral Oligomeric Silsesquioxane Modified Polyolefin Separator for Advanced Lithium–Metal Batteries

Enhanced Mechanical Behavior and Electrochemical Performance of Composite Separator by Constructing Crosslinked Polymer Electrolyte Networks on Polyphenylene Sulfide Nonwoven Surface

Fabrication electro-spun Poly(vinyl alcohol)-Melamine nonwoven membrane composite separator for high-power lithium-ion batteries

High‐Performance PE‐BN/PVDF‐HFP Bilayer Separator for Lithium‐Ion Batteries

Role of Separator Surface Polarity in Boosting the Lithium-Ion Transport Property for a Lithium-Based Battery

Polyethylene separator grafting with polar monomer for enhancing the lithium-ion transport property

The Enhanced Performance of Polyethylene Composite Separators by the Modification of Lithium Salt@SiO2 Nanoparticles

Polyethylene Terephthalate/Poly (vinylidene Fluoride) Composite Separator for Li-Ion Battery