Abstract:Considering the effects of blade rotation and casing flexibility, a new blade-casing rubbing model is proposed. The blade is assumed to be clamped on a rigid disk and simulated by the twisted-shape plate model with a stagger angle, while the casing is simulated by the cylindrical shell model. Considering the influences of the centrifugal stiffening, spin softening and Coriolis force, the equations of motion of the rotating blade are obtained by Hamilton's principle and Galerkin method; the equations are coupled with flexural, radial and swing vibrations. Based on Sanders' shell theory, the cylindrical shell casing with elastic constraints is established where the elastic constraints are described using a set of springs on casing edges. Both models are verified by the result comparisons obtained from the finite element (FE) model or the published literature. The blade-tip is divided into n points along the chordwise direction of the blade, and whether rubbing occurs or not can be determined by judging the position relations between the blade-tip points and the corresponding casing points. The rubbing-induced vibration responses between the rotating blade and the flexible casing are also compared with those obtained from the rubbing model with the rigid casing and the FE model with the flexible casing. The results show that, compared with the rigid casing model using lumped mass points, the cylindrical shell casing model can consider the flexibility of the casing, and the nodal diameter vibration of the casing induced by rubbing can be observed. Moreover, both the rubbing force and the vibration response of the blade contacting with the flexible casing will decrease compared with those contacting with the rigid casing. Finally, based on the proposed model, the effects of rotational speed, blade shape, blade-tip geometry and asymmetric support boundary of casing on the rubbing responses of the system are also analyzed.

Experimental Study on Blade-casing Rubbing Considering Thermal Effect

Dynamics research on the rubbing process and rubbing forms of rotor–blade–casing systems

Experimental investigation and analytical modeling for blade-casing rubbing force

Dynamic Response of Rubbing Happening in A Flexible Rotor-Bearing System

Research on the Influence of Crack Parameters on the Vibration Characteristics of Gas Turbine Compressor Blades

Study on Rubbing-Induced Vibration Characteristics Considering the Flexibility of Coated Casings and Blades

Experimental Investigation of Rotor Rubbing Faults

Thermal–Elastic–Magnetic Coupling-Induced Rubbing Behaviors of a Bladed Thin-Walled Rotor with Distributed Magnetic Actuators

Blade-coating-casing rubbing induced vibration responses and wear characteristics

Blade-Loss-Caused Rubbing Dynamic Characteristics of Rotor-Bladed Disk-Casing System

Effect of SFD on rubbing-induced vibration characteristics in dual-rotor-blade-casing system

Vibration investigation of rotor system with unbalance and blade-casing rubbing coupling faults

Experimental analysis of dual-rotor-support-casing system with blade-casing rubbing

Dynamic Characteristics of Rotor System and Rub-Impact Fault Feature Research Based on Casing Acceleration

A dynamic model for simulating rubbing between blade and flexible casing

Dynamics analysis and experiment research of vibration response for dual-rotor system under rubbing fault

Energy Response and Fault Severity Study of Rotor-Rigid Blade-Casing System with Rub-Impact Fault

Rub-impact dynamic analysis of a dual-rotor system with bolted joint structure: Theoretical and experimental investigations

Dynamic Response of Steam Seal Rubbing in Steam Turbine Considering Thermal Effect

Study on rubbing characteristics of blade-casing model considering transverse cracks

Study on the Diagnosis of Rub-Impact Fault Based on Finite Element Method and Envelope Demodulation