Abstract:For the traditional three-axis configuration of additive manufacturing (AM) platform, it is imperative to construct adequate support structures prior to the fabrication of overhanging features on the part geometry. To completely eliminate the use of support by taking advantage of the newly emerged five-axis AM platform, a novel multidirectional process planning algorithm for 3 + 2-axis AM is proposed in this paper. The core of the strategy is to decompose the model into support-free parts directly pertaining to the cusp-height constraint, each with its own build direction. The nozzle will follow the staged sequence to fabricate each individual part along its build direction, as facilitated by the adjustable orientation of the nozzle head on a five-axis platform. For model decomposition, a recursive downward flooding expansion algorithm is introduced to identify a surface patch in accordance with the support-free criteria. After being stitched as a watertight geometry, the decomposed part together with the remaining part will be archived into a prescribed hierarchy based on which the build sequence is readily established. Preliminary testing results have verified the effectiveness of the algorithm to handle the geometries of different types. Note to Practitioners-This paper was motivated by the deficiencies encountered in traditional three-axis additive manufacturing (AM). In practice, most commercialized 3-D printers are of three-axis configuration, on which it is required to construct support structures for those overhanging features on the part geometry. These support structures not only cost extra time and materials but also leave noticeable artifacts on the part surface even after the clean-up process. As an ultimate solution to this issue, the newly emerged five-axis AM platform is able to physically eliminate the need for support by properly and continuously adjusting the build direction. This, however, demands a delicate algorithm for determining the changing build direction for an arbitrary part that is currently unavailable. To simplify this challenging task, we took advantage of the 3 + 2 motion capability of the five-axis AM platform to progressively plan the three-axis printing process for a given freeform model. The core idea of our solution is to decompose the model by a flooding-like algorithm into individual support-free parts, each of which is printable along a fixed build direction without any support. The nozzle will then follow a prescribed sequence to print each part one on the other. The proposed algorithm is purely geometric, without taking into account the material property and the mass distribution. Preliminary testing results show that our approach is feasible and robust when dealing with limited geometries that abide a tree-like structure and features a clear flat base. Besides these geometric limitations, our current preliminary scheme for collision avoidance may become invalid upon an arbitrary complex geometry. We will further extend this method to cater to more sophisticated and general geometries.

Research on Curved Layer Slicing and Spatial Path Generation Method in Five-axis Material Extrusion Process

Modeling and Process Planning for Curved Layer Fused Deposition

A Non-Retraction Path Planning Approach for Extrusion-Based Additive Manufacturing

A Novel Path Planning Methodology for Extrusion-Based Additive Manufacturing of Thin-Walled Parts

An Optimization Approach for Path Planning of High-Quality and Uniform Additive Manufacturing

Build Orientation Optimization for Extrusion-Based Additive Manufacturing Coupling with Adaptive Slicing

Curved-layered Material Extrusion Modeling for Thin-Walled Parts by a 5-Axis Machine

Stress-Based Path Planning on Quad Mesh for Additive Manufacturing

Spherical Path Planning for Multi Axis Support Free Additive Manufacturing of Truss Structures

Path Planning of Complicated Hierarchical Thin-Wall Structures Using Multi-Material Additive Manufacturing Technology

Optimization of Tool-Path Generation for Material Extrusion-Based Additive Manufacturing Technology

Curved layer based process planning for multi-axis volume printing of freeform parts

Nonplanar Slicing and Path Generation Methods for Robotic Additive Manufacturing

Feature-based five-axis path planning method for robotic additive manufacturing

Fused Deposition Modeling Five-Axis Additive Manufacturing: Machine Design, Fundamental Printing Methods and Critical Process Characteristics

Slicing Heterogeneous Solid Using Octree-Based Subdivision and Trivariate T-splines for Additive Manufacturing

A curved layering algorithm based on voxelization and geodesic distance for robotic GMA additive manufacturing

Modeling of non-planar slicer for improved surface quality in material extrusion 3D printing

Support-Free Layered Process Planning Toward 3 + 2-Axis Additive Manufacturing

A Trivariate T-spline Based Direct-Slicing Framework for Support-Free Additive Manufacturing

Development of an Extrusion-based Five-axis 3D Printing System for Manufacturing of Complex Parts.