Abstract:Plasma electrolytic oxidation (PEO) is an attractive technology for improving resistance to wear, heat and corrosion of aluminum alloys. PEO results in a hard, well-adhered alumina ceramic coating with a morphology which is graded from a dense region near the substrate interface to a porous outer region. Such properties mean that PEO can be an ideal underlying layer for the application of solid lubricants which can be entrapped in outer pores and provide reservoirs for the tribological contact lubrication. This study investigates the fretting wear behavior and adaptive mechanisms for a PEO-produced alumina surface of about 11–12GPa hardness with a top layer of an MoS2/Sb2O3/C chameleon solid lubricating coating, the composition of which was designed to self-adapt in variable humidity environments for friction and wear reduction. Coupons of AA 6082 alloy were coated by the PEO process and then were over-coated by a burnishing process with a MoS2/Sb2O3/C chameleon coating to prepare a duplex coating combination. The coated surfaces were investigated using nanoindenation, Raman spectroscopy and scanning electroscopy and were then subjected to fretting wear tests against steel and alumina balls with variable amplitude (0–100μm) and loads (10–100N) in both humid air and in dry nitrogen environment conditions. The tests demonstrated low friction coefficients, considerable reduction in critical amplitude for the stick-slip transition, and self-adaptive tribological behavior in cycled environment tests. Friction coefficients of the order of 0.10–0.15 in humid air and 0.06–0.09 in dry nitrogen were recorded and linked with the surface self-adjustment from graphite to MoS2 lubrication, respectively, which was confirmed by Raman spectroscopy. The studies demonstrate the effectiveness of the PEO/chameleon duplex coating system for the friction reduction of and fretting wear in the gross-slip regime, as well as significantly reducing the critical amplitude of stick-slip transition for fatigue wear mitigation.

Effects of Texture Density on the Tribological Properties of Plasma Electrolytic Oxidation/Polytetrafluoroethylene Coatings Formed on Aluminum Alloys

Influence of ceramic coating pores on the Tribological performance of PEO–PTFE composite coatings on the Ta–12W alloy

Effect of Low-Friction Composite Polymer Coatings Fabricated by Electrophoretic Deposition and Heat Treatment on the Ti-6Al-4V Titanium Alloy’s Tribological Properties

Tribological properties of PTFE/PPS films deposited on the ultrasonic rolling textured substrates by electrohydrodynamic atomization under dry reciprocating sliding

Combined Effect of a Laser Cladded Coating and Surface Texture on Tribological Performance Under Dry Sliding and Starved Lubrication

Fretting Wear Behavior of Duplex PEO/chameleon Coating on Al Alloy

Friction and Wear Behaviors of Perfluoropolyether-Impregnated Plasma-Sprayed Yttria-Stabilized Zirconia Coatings

Tribological properties of PTFE/PI-PAI composite coatings filled by GO/ ZrO 2 on the surfaces of different micro-textures

Pulmonary sequelae of bronchopulmonary dysplasia survivors: high-resolution CT findings.

Effect of electrolyte composition on corrosion behavior and tribological performance of plasma electrolytic oxidized TC4 alloy

Tribological Properties of Ti6Al4V Titanium Textured Surfaces Created by Laser: Effect of Dimple Density

Effects of Surface Coating Preparation and Sliding Modes on Titanium Oxide Coated Titanium Alloy for Aerospace Applications

Influence of Alternating Current Density on the Mechanical Behavior and Microstructure of PEO-Coated 7075 Aluminum Alloy

Preparation of the wear and corrosion-resistant coating using a composite process of laser surface texturing technology and plasma electrolytic oxidation

Self-Lubricating PEO Coating on an Al Alloy Produced by Vacuum Impregnation Post-treatment

Tribological properties of PEEK-based composite coating prepared by thermal spraying

Hydrophobicity and Wear Resistance of Textured Carbon Fiber/Polytetrafluoroethylene Composite Coatings

Investigating the effect of polytetrafluoroethylene on the tribological properties and corrosion resistance of epoxy/hydroxylated hexagonal boron nitride composite coatings

Enhancing PEO coating on TC6 alloy through in-situ synthesis of MoSe 2 —Towards more efficient wear-reducing lubrication and wear resistance

Geometry Effect of Different PTFE Fillers on Self-Lubricating PF Composites: Mechanical and Tribological Properties

Wear and Corrosion Resistance of Plasma Electrolytic Oxidation Coatings on 6061 Al Alloy in Electrolytes with Aluminate and Phosphate