Abstract:The durability of proton exchange membrane fuel cell stacks is a key limiting factor in transportation application due to severe conditions, where startup-shutdown and local fuel starvation most severely threaten the structure stability. In this paper, potentiostatic test at the average of 1.4 V is conducted to accelerate the carbon corrosion and structure damage in the cathode in a seven-cell commercial stack. A complete diagnosis framework based on micro-current excitation is established to systematically and in-situ evaluate the state-of-health of the cathode and the membrane, the mass transfer state, and the cell inconsistency in stack-level. Afterwards, the structure damage of cathode catalyst layer is characterized with scanning electron microscopy and energy disperse spectroscopy to provide direct evidences. In the early stage, the electrochemical surface area attenuates severely attributed to detachment and agglomeration of Pt particles, and the catalyst layer framework becomes more porous and hydrophilic, thus raising the double-layer capacitance. The weak catalyst layer structure tends to collapse starting from the lower layer close to the membrane, thereby leaving the dense lower layer and the porous upper layer in all cells. The damage mode is accurately manifested by the stepwise increase in the hydrogen transfer coefficient in the cathode that is identified in electrochemical testing. Meanwhile, the per-formance decay during operation exhibits typical characteristics of water flooding deterioration, as indicated by the three stages of steady voltage decay, drastic and periodic voltage fluctuation, and cell reversal. Therefore, the increase in water sensitivity and its dominant role in startup-shutdown-induced degradation are confirmed, which are also supported by the carbon-corrosion-induced ionomer agglomeration surrounding the enlarged pores in the upper layer. The enlarged pores are prone to be flooded, and the collapsed partial structure inherently limits the mass transfer. The aging process, evolution mechanisms of internal damage, and dominant factors during startup-shutdown are therefore identified and clearly revealed in stack-level.

Study on the Influence of Segmented Fuel Cell by Grooving Method and Its Application in Oxygen Starvation Diagnosis

Microfluidic fuel cells integrating slanted groove micro-mixers to terminate growth of depletion boundary layer thickness

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Experimental Investigation of Fuel Starvation on Industrial-Sized Solid Oxide Fuel Cells Using Segmented Cathodes and Area Specific Resistances

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

Behavior of Current Distribution Evolution under Reactant Starvation Conditions Based on a Single Polymer Electrolyte Membrane Fuel Cell (PEMFC) with Triple-Serpentine Flow Field: an Experimental Study

An Evaluation Method of Gas Distribution Quality in Dynamic Process of Proton Exchange Membrane Fuel Cell

A Prognostic-Based Dynamic Optimization Strategy for a Degraded Solid Oxide Fuel Cell

Spatial distribution characteristics in segmented PEM fuel cells: Three-dimensional full-morphology simulation

Spatially resolved electrochemical performance and temperature distribution of a segmented solid oxide fuel cell under various hydrogen dilution ratios and electrical loadings

Novel Methods for Fault Diagnosis and Enhancing CO Tolerance in PEM Fuel Cells Fueled with Impure Hydrogen

Carbon corrosion induced fuel cell accelerated degradation warning: From mechanism to diagnosis

Experimental and numerical investigation of the reverse current evolution during the start-up of a fuel cell

A starvation diagnosis method for a PEM fuel cell during dynamic loading

Experimental Investigation on PEM Fuel Cell Flooding Mitigation under Heavy Loading Condition

Development of Grooves in Gas Diffusion Layers for PEM Fuel Cells Considering Mechanisms of Oxygen Transport and Water Drainage

Quantitative Investigation of Oxygen Transport in Proton Exchange Membrane Fuel Cell: Considering Cross-Flow

Oxygen Starvation Induced Cell Potential Decline and Corresponding Operating State Transitions of a Direct Methanol Fuel Cell in Galvanostatic Regime

Study of Internal Multi-Parameter Distributions of Proton Exchange Membrane Fuel Cell with Segmented Cell Device and Coupled Three-Dimensional Model

Optimization strategies to mitigate reactant starvation in a dead-ended hydrogen–oxygen proton exchange membrane fuel cell during cyclic loading

Diagnosis and mechanism analysis of startup-shutdown-induced fuel cell degradation in stack-level