Abstract:The durability of proton exchange membrane fuel cell stacks is a key limiting factor in transportation application due to severe conditions, where startup-shutdown and local fuel starvation most severely threaten the structure stability. In this paper, potentiostatic test at the average of 1.4 V is conducted to accelerate the carbon corrosion and structure damage in the cathode in a seven-cell commercial stack. A complete diagnosis framework based on micro-current excitation is established to systematically and in-situ evaluate the state-of-health of the cathode and the membrane, the mass transfer state, and the cell inconsistency in stack-level. Afterwards, the structure damage of cathode catalyst layer is characterized with scanning electron microscopy and energy disperse spectroscopy to provide direct evidences. In the early stage, the electrochemical surface area attenuates severely attributed to detachment and agglomeration of Pt particles, and the catalyst layer framework becomes more porous and hydrophilic, thus raising the double-layer capacitance. The weak catalyst layer structure tends to collapse starting from the lower layer close to the membrane, thereby leaving the dense lower layer and the porous upper layer in all cells. The damage mode is accurately manifested by the stepwise increase in the hydrogen transfer coefficient in the cathode that is identified in electrochemical testing. Meanwhile, the per-formance decay during operation exhibits typical characteristics of water flooding deterioration, as indicated by the three stages of steady voltage decay, drastic and periodic voltage fluctuation, and cell reversal. Therefore, the increase in water sensitivity and its dominant role in startup-shutdown-induced degradation are confirmed, which are also supported by the carbon-corrosion-induced ionomer agglomeration surrounding the enlarged pores in the upper layer. The enlarged pores are prone to be flooded, and the collapsed partial structure inherently limits the mass transfer. The aging process, evolution mechanisms of internal damage, and dominant factors during startup-shutdown are therefore identified and clearly revealed in stack-level.

Experimental and numerical investigation of the reverse current evolution during the start-up of a fuel cell

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Diagnosis and mechanism analysis of startup-shutdown-induced fuel cell degradation in stack-level

Investigation of real-time changes and recovery of proton exchange membrane fuel cell in voltage reversal

Numerical Studies of Cold-Start Phenomena in PEM Fuel Cells: A Review

Cathode catalyst layer aging of proton exchange membrane fuel cell during emulated start-up/shut-down phases

A Pem Fuel Cell Model for Cold-Start Simulations

Experimental investigation of dynamic performance and transient responses of a kW-class PEM fuel cell stack under various load changes

Numerical studies of cold-start phenomenon in PEM fuel cells

The Recovery Mechanism of Proton Exchange Membrane Fuel Cell in Micro-Current Operation

Study on internal dynamic response during cold start of proton exchange membrane fuel cell with parallel and serpentine flow fields

Optimization of purge strategy under fuel cell startup conditions based on CFD-Simulink collaborative simulation

A comprehensive investigation on performance heterogeneity of commercial-size fuel cell stacks during dynamics operation

Experimental Study on Dual Recirculation of Polymer Electrolyte Membrane Fuel Cell

Modeling of Fuel Cell Cold Start and Dimension Reduction Simplification Method

Transient Computation Fluid Dynamics Modeling of A Single Proton Exchange Membrane Fuel Cell with Serpentine Channel

A Coupled CFD Model for an Accurate and Fast Prediction of the Unsteady Operation Process of a Proton Exchange Membrane Fuel Cell

Recovery characteristics of reversible degradation for proton exchange membrane fuel cell stack under accelerated stress test

In-situ Characterization of Gas Distribution in Proton Exchange Membrane Fuel Cell Stacks

Experimental Study on Cold Start Strategies of Fuel Cell Stack: Sensitivity Analysis, Optimization, and Boundaries

Control-Oriented Modeling of Purging Process and Cold Start of Proton-Exchange Membrane Fuel Cell