Path Planning and Tracking for Vehicle Collision Avoidance in Lateral and Longitudinal Motion Directions

Jie Ji,Hong Wang,Yue Ren

DOI: https://doi.org/10.2200/s01037ed1v01y202008aat013

2020-01-01

Synthesis Lectures on Advances in Automotive Technology

Abstract:In recent years, the control of Connected and Automated Vehicles (CAVs) has attracted strong attention for various automotive applications.

What problem does this paper attempt to address?

Robust Hierarchical Model Predictive Control for Trajectory Tracking with Obstacle Avoidance

Yanchuan Xu,Huarong Zheng,Weimin Wu,Jun Wu

DOI: https://doi.org/10.1016/j.ifacol.2020.12.056

2020-01-01

Abstract:A robust hierarchical path planning and trajectory tracking framework is proposed to maintain a collision-free path for autonomous vehicles. For the path-planning, a constrained finite-time optimal problem is solved to generate a feasible and collision-free trajectory considering the vehicle kinematics. For the trajectory-tracking, a motion controller is proposed by solving a constrained model predictive control problem, obtaining the front wheel steering angles. Furthermore, to enhance the robustness of the motion controller against the uneven network-induced time delay and unmodelled lateral vehicle dynamics, an additional error feedback mechanism is introduced in the motion controller. Simulations are conducted when both moving obstacles and static obstacles exist. Simulation results show that the proposed hierarchical control framework can effectively guarantee safe and feasible driving maneuvers.
A Lane Changing Time Point and Path Tracking Framework for Autonomous Ground Vehicle

Jiayu Fan,Jun Liang,Anjan K. Tula

DOI: https://doi.org/10.1049/itr2.12180

IF: 2.7

2022-01-01

IET Intelligent Transport Systems

Abstract:Performing stable and safe lane changes can avoid collisions and improve traffic safety. In recent years, most of the research in automated ground transportation was focused on path planning and path tracking. However, this work emphasizes the importance of lane changing time point. Based on traditional safety distance, a novel concept, that is the synthesized safety distance for lane changing (SSDLC), is proposed to study lane changing time point. It consists of the reference safety distance and lane changing safety distance, and the weight coefficient between them is obtained by fuzzy logic control algorithm. Additionally, the joint model predictive control (JMPC) is proposed to follow the reference trajectory. This newly established algorithm not only considers the physical saturation of actuators but the yaw stability characteristics. To overcome the calculation difficulty to obtain the optimal results in the prescribed time, the algorithm adds a relaxation factor in the objective function. Finally, the lane changing time point and path tracking framework is modeled and simulated on a CarSim-Simulink platform. Four scenarios are carried out to illustrate the feasibility of the proposed framework.
Path-Tracking Algorithms for Collision Avoidance

Jie Ji,Hong Wang,Yue Ren

DOI: https://doi.org/10.1007/978-3-031-01507-6_3

2021-01-01

Abstract:Once the path for collision avoidance is predetermined by using the algorithms in the previous chapter, the autonomous vehicle is required to follow this specific trajectory given by an onboard planner and ensure that the vehicle successfully avoids the obstacles. This task can be accomplished by a path-tracking controller, which calculates the appropriate actuating input to control the vehicle’s movement in both lateral and longitudinal directions. Specifically, its operations include adjusting the vehicle’s lateral position by modifying the steering inputs, or adjusting the vehicle’s longitudinal motion by modifying the brake or throttle actuators [51, 52]. A good path-tracking strategy timely tracks reference planned path by producing the required low-level control actions, and two critical effects for ground vehicles, dynamics, and kinematics should be accurately considered as an important factor in high-performance control systems, as shown in Fig. 3.1.
Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Xu Zhijiang,Zhao Wanzhong,Wang Chunyan,Dai Yifan

DOI: https://doi.org/10.16356/j.1005-1120.2018.04.729

2018-01-01

Abstract:Automotive collision avoidance technology can effectively avoid the accidents caused by dangerous traffic conditions or driver’s manipulation errors.Moreover,it can promote the development of autonomous driving for intelligent vehicle in intelligent transportation.We present a collision avoidance system,which is composed of an evasive trajectory planner and a path following controller.Considering the stability of the vehicle in the conflict-free process,the evasive trajectory planner is designed by polynomial parametric method and optimized by genetic algorithm.The path following controller is proposed to make the car drive along the designed path by controlling the vehicle’s lateral movement.Simulation results show that the vehicle with the proposed controller has good stability in the collision process,and it can ensure the vehicle driving in accordance with the planned trajectory at different speeds.The research results can provide a certain basis for the research and development of automotive collision avoidance technology.
Path Planning and Tracking for Vehicle Collision Avoidance Based on Model Predictive Control With Multiconstraints

Jie Ji,Amir Khajepour,Wael William Melek,Yanjun Huang

DOI: https://doi.org/10.1109/tvt.2016.2555853

IF: 6.8

2017-02-01

IEEE Transactions on Vehicular Technology

Abstract:A path planning and tracking framework is presented to maintain a collision-free path for autonomous vehicles. For path-planning approaches, a 3-D virtual dangerous potential field is constructed as a superposition of trigonometric functions of the road and the exponential function of obstacles, which can generate a desired trajectory for collision avoidance when a vehicle collision with obstacles is likely to happen. Next, to track the planned trajectory for collision avoidance maneuvers, the path-tracking controller formulated the tracking task as a multiconstrained model predictive control (MMPC) problem and calculated the front steering angle to prevent the vehicle from colliding with a moving obstacle vehicle. Simulink and CarSim simulations are conducted in the case where moving obstacles exist. The simulation results show that the proposed path-planning approach is effective for many driving scenarios, and the MMPC-based path-tracking controller provides dynamic tracking performance and maintains good maneuverability.

telecommunications,engineering, electrical & electronic,transportation science & technology
Conclusions and Future Works

Jie Ji,Hong Wang,Yue Ren

DOI: https://doi.org/10.1007/978-3-031-01507-6_7

2021-01-01

Abstract:Different path-planning and tracking algorithms for vehicle collision avoidance in lateral and longitudinal motion directions are discussed in this book. Based on the reviews in the previous sections, it can be deduced that a successful collision avoidance demands a complex system which considers various factors such as calculation costs, constraints (vehicle dynamics, obstacles, and environment), as well as the incorporation of latest computational and sensing devices.
Simulation research on emergency path planning of an active collision avoidance system combined with longitudinal control for an autonomous vehicle

Haotian Cao,Xiaolin Song,Zhengyu Huang,Lubin Pan

DOI: https://doi.org/10.1177/0954407015618533

2016-08-06

Abstract:Autonomous vehicle technology is greatly valued nowadays, and an active collision avoidance system is one of the key parts for autonomous driving. This study presents a comprehensive architecture of an active collision avoidance system for an autonomous vehicle, which is integrated with a decision-making module, a path-planning module, a lateral-path-following module and a fuzzy adaptive following module (longitudinal motion) to deal with potential hazards on a straight road or a curved road. In order to make the planned path for overtaking manoeuvres safer, an improved harmonic velocity potential approach for path planning is presented, which innovatively enhances the effect of an obstacle potential on a road by adding a scale term, so that it can generate a smooth path for a vehicle-overtaking manoeuvre. All the potentials which are used for vehicle lane keeping or lane changing are well designed. The lateral-path-following module is based on the constrained linear model predictive control approach, which ensures that the host vehicle can follow the planned path precisely. Furthermore, when the overtaking manoeuvre is not suitable, the fuzzy adaptive following module is utilized to ensure that the host vehicle can adaptively keep a safe distance from the preceding vehicle. Tactical decisions, such as overtaking, accelerating or decelerating, are determined by the decision-making module. Finally, several typical scenarios with low traffic on a straight road or a curved road are simulated to verify the effectiveness and the feasibility of the active collision avoidance system. The simulation results show that the host vehicle can make a successful collision avoidance manoeuvre without the intervention of a human driver in different situations.

engineering, mechanical,transportation science & technology
Personalized motion planning and tracking control for autonomous vehicles obstacle avoidance

Xinglong Zhang,Wenxin Zhang,Youqun Zhao,Hai Wang,Fen Lin,Yingfeng Cai,You qun Zhao

DOI: https://doi.org/10.1109/tvt.2022.3152542

IF: 6.8

2022-01-01

IEEE Transactions on Vehicular Technology

Abstract:A personalized motion planning and tracking control framework is proposed to prevent collisions between autonomous vehicles and obstacles ahead. The presented framework consists of a motion planning generator and a cooperative tracking controller. For motion planning, a multi-constrained numerical optimization method is used to generate the obstacle avoidance motion planning for autonomous vehicles according to the individual needs of the passengers. For tracking control, a cooperative longitudinal and lateral motion controller is designed to track the planning results. The longitudinal controller is composed of a model predictive controller, and the lateral controller is composed of a nonlinear steering controller. The planning results show that the adopted motion planning algorithm can achieve personalized motion planning according to the needs of the passengers. Simulink and CarSim co-simulation results show the excellent tracking performance of the proposed cooperative controller. The performance analysis results show that the proposed framework can improve the corresponding driving performance according to the individual needs of the passengers.

telecommunications,engineering, electrical & electronic,transportation science & technology
Path Tracking and Handling Stability Control Strategy With Collision Avoidance for the Autonomous Vehicle Under Extreme Conditions

Yong Chen,Sizhong Chen,Hongbin Ren,Zepeng Gao,Zheng Liu

DOI: https://doi.org/10.1109/tvt.2020.3031661

IF: 6.8

2020-12-01

IEEE Transactions on Vehicular Technology

Abstract:A novel control strategy is proposed for the autonomous vehicle equipped with the front and rear independent steering systems to enhance the capability of collision avoidance and improve path tracking and handling stability under critical maneuvers. The novel control system includes a path replanning controller, a path tracking controller, and a stability controller. The path replanning controller is designed to generate a collision-free trajectory by optimizing a cost function. The cost function can be updated quickly and iteratively, according to the dynamic fitting matrix and measurement signals. The path tracking controller and the stability controller with considering multi-constraints are designed to generate the steering angle of the front wheel and the rear wheel, respectively, which improve the ability of path tracking and handling stability of the autonomous vehicle under extreme conditions. The real-time effectiveness of the proposed control strategy is verified and evaluated in Hardware-in-the-loop (HIL) simulation environment. The function of collision avoidance of the control algorithm is verified in the scenario of the preset obstacle artificially on the globally planned path. The proposed control strategy, presents superior performance against two other control strategies based on model predictive control algorithm, and also exhibits satisfactory performance in terms of path tracking as well as handling stability of the autonomous vehicle.

telecommunications,engineering, electrical & electronic,transportation science & technology
Longitudinal Predictive Control for Vehicle-Following Collision Avoidance in Autonomous Driving Considering Distance and Acceleration Compensation

Shutong Yin,Chunlin Yang,Ibna Kawsar,Haifeng Du,Yongjun Pan

DOI: https://doi.org/10.3390/s22197395

IF: 3.9

2022-09-30

Sensors

Abstract:In response to the widespread adoption of vehicle-following systems in autonomous applications, the demand for collision warning to enable safer functionalities is increasing. This study provides an approach for automated vehicle guidance to follow the preceding vehicles longitudinally and puts emphasis on the performance of collision avoidance. The safety distance model is established, which contains a distance compensation algorithm to deal with the special case on curved roads. By introducing the algorithm of velocity and distance prediction, the collision risks are detected and measured in real time. The objective function is established based on optimal control theory to solve the desired following acceleration. The control system designed with the method of proportion integration differentiation combines throttle percentage and brake pressure as outputs to compensate acceleration. In the Carsim and Simulink co-simulation platform, the control system for longitudinal collision avoidance is simulated and analysed for four typical working conditions: the preceding vehicle drives at a constant speed on straight and curved roads, while the preceding vehicle drives at various speeds on straight and curved roads. The results validate the feasibility and effectiveness of the proposed method, which can be used for the longitudinal control of vehicle-following active collision avoidance.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Optimal Control-Based Online Motion Planning For Cooperative Lane Changes Of Connected And Automated Vehicles

Bai Li,Youmin Zhang,Yuming Ge,Zhijiang Shao,Pu Li

DOI: https://doi.org/10.1109/IROS.2017.8206215

2017-01-01

Abstract:This work formulates the multi-vehicle lane change motion planning task as a centralized optimal control problem, which is beneficial in being generic and complete. However, a direct solution to this optimal control problem is numerically intractable due to the dimensionality of the collision-avoidance constraints and nonlinearity of the vehicle kinematics. A progressively constrained dynamic optimization (PCDO) method is proposed to facilitate the numerical solving process of this complicated problem. PCDO guarantees to efficiently obtain an optimum to the original optimal control problem via solving a sequence of simplified problems which gradually judge and reserve only the active collision-avoidance constraints. A first-regularization-then-action strategy, together with the look-up table technique, is developed for online solutions. At the regularization stage, the vehicles form a standard formation by linear acceleration/deceleration only. At the action stage, the vehicles execute lane change motions computed offline and recorded in the look-up table. This makes online motion planning feasible because 1) the computational complexity at the regularization stage scales linearly rather than exponentially with the vehicle number; and 2) online computation at the action stage is fully avoided through data extraction from the look-up table.
Integrated Avoid Collision Control of Autonomous Vehicle Based on Trajectory Re-Planning and V2V Information Interaction

Fen Lin,Kaizheng Wang,Youqun Zhao,Shaobo Wang

DOI: https://doi.org/10.3390/s20041079

2020-02-17

Abstract:An integrated longitudinal-lateral control method is proposed for autonomous vehicle trajectory tracking and dynamic collision avoidance. A method of obstacle trajectory prediction is proposed, in which the trajectory of the obstacle is predicted and the dynamic solution of the reference trajectory is realized. Aiming at the lane changing scene of autonomous vehicles driving in the same direction and adjacent lanes, a trajectory re-planning motion controller with the penalty function is designed. The reference trajectory parameterized output of local reprogramming is realized by using the method of curve fitting. In the framework of integrated control, Fuzzy adaptive (proportional-integral) PI controller is proposed for longitudinal velocity tracking. The selection and control of controller and velocity are realized by logical threshold method; A model predictive control (MPC) with vehicle-to-vehicle (V2V) information interaction modular and the driver characteristics is proposed for direction control. According to the control target, the objective function and constraints of the controller are designed. The proposed method's performance in different scenarios is verified by simulation. The results show that the autonomous vehicles can avoid collision and have good stability.
Path Planning and Obstacle Avoidance Control for Autonomous Multi-Axis Distributed Vehicle Based on Dynamic Constraints

Zhichao Li,Junqiu Li,Weichen Wang

DOI: https://doi.org/10.1109/tvt.2022.3227447

IF: 6.8

2023-04-21

IEEE Transactions on Vehicular Technology

Abstract:Obstacle avoidance problem for the autonomous vehicle has received more and more attention these years, especially for the autonomous heavy vehicle, which has the high gravity center, large carrying capacity and promising commercial prospect. However, the vehicle dynamic properties have been rarely considered for path planning, which is a crucial factor for driving safety. An integrated collision avoidance framework that consists of a new path planner and a tracking controller considering multiple dynamic constraints is proposed for an autonomous multi-axis distributed vehicle. In the upper level, a new optimal path generator based on the B-splines is designed for safety and stability purposes, and the collision avoidance path is optimized considering multiple dynamic constraints, including the tire nonlinear dynamic, lateral stability limits and the anti-slip constraints. Meanwhile, a safety assessment evaluator according to the time to collision calculation is designed for risk level recognition and path planning weight determination. In the lower level, a path tracking controller based on the nonlinear model predictive control (NMPC) is designed to improve the control accuracy, and a high-fidelity nonlinear dynamic predictive vehicle model with 16 degrees of freedom is established to depict the vehicle dynamic properties comprehensively. To solve the nonlinear optimization problem and get the optimal control steering angle output, an adaptive weight adjustment strategy and a varying predictive duration method are formulated. The optimization constraints related to steering actuator ability, plane stability limits, rollover prevention thresholds and tire adhesion requirements are constructed and converted as the bounds of the vehicle dynamic states. To verify the proposed framework, the simulation and HIL test platform are built and different driving scenarios are validated. The test results show the satisfactory performance of path planning and path tracking con- idering the dynamic constraints for safety and stability.

telecommunications,engineering, electrical & electronic,transportation science & technology
Efficient Path Planning and Tracking Control of Autonomous Vehicles in Park Scenarios Based on Sparrow Search and Stepwise Prediction

Haotian Zhang,Yali Yu,Yonggang Liu,Fengyang Jiang,Zheng Chen,Yuanjian Zhang

DOI: https://doi.org/10.1109/tte.2024.3361853

IF: 6.519

2024-01-01

IEEE Transactions on Transportation Electrification

Abstract:Electrification and intelligence dominate the developing trend of automobiles. Except the tremendous progress in electrification, autonomous driving is widely investigated with the advancement of perception and communication technologies. While, proper path planning and rigorous tracking control in autonomous driving remain challenging, especially in park scenarios. To cope with it, an efficient long-short term path planning algorithm is firstly proposed to compensate the lack of global driving information in park scenarios, and a fifth-order polynomial and an improved artificial potential field method are incorporated to devise the candidate trajectory clusters for obstacle avoidance. Secondly, the collision detection of candidate trajectories is attained with the support of a rectangular vehicle model, and the dangerous trajectories of potential collisions in the candidate clusters are screened out. Then, three evaluation indicators considering safety, comfort and lane change efficiency are weighed to establish the multi-performance objective function, and the sparrow search algorithm is exploited to determine the optimal obstacle avoidance trajectory. Finally, the stepwise prediction with multiple prediction models is exploited to achieve precise trajectory. The simulation and experiment results manifest that the proposed method enables to achieve precise path planning and tracking, and ensures satisfactory safety, comfort, and real-time performance in park scenes.

engineering, electrical & electronic,transportation science & technology
Collision Avoidance Motion Planning for Connected and Automated Vehicle Platoon Merging and Splitting with a Hybrid Automaton Architecture

Shunchao Wang,Zhibin Li,Bingtong Wang,Meng Li

DOI: https://doi.org/10.1109/tits.2023.3315063

IF: 8.5

2024-01-01

IEEE Transactions on Intelligent Transportation Systems

Abstract:Connected and automated vehicle (CAV) platooning exhibits significant potential in enhancing traffic efficiency and sustainability. In unsteady traffic conditions, CAV platoons frequently require splitting and merging maneuvers to avoid obstacles. This study introduces a hybrid automaton architecture for collision avoidance motion planning during CAV platoon merging and splitting. A velocity obstacle algorithm based on potential fields is developed to detect collision risks and calculate collision-free velocity solutions. Two predictive control-based optimization models are developed for collision-avoidance path planning, catering to both single-cruising vehicles and vehicle platoons. A synergetic architecture based on hybrid automaton is developed to coordinate vehicle motions during platoon splitting and merging. Numerical experiments are performed to evaluate the performance of the proposed hybrid automaton architecture under various obstacle scenarios. The results demonstrate that the proposed algorithms effectively identify collision risks within CAV platoons and determine optimal vehicle velocities. The proposed architecture demonstrates excellent performance in adjusting vehicle maneuvers and adapting CAV platoon formations to changing driving environments.
Safe and efficient collision avoidance control for autonomous vehicles

Qiang Wang,Dachuan Li,Joseph Sifakis

DOI: https://doi.org/10.48550/arXiv.2008.04080

2020-10-03

Abstract:We study a novel principle for safe and efficient collision avoidance that adopts a mathematically elegant and general framework abstracting as much as possible from the controlled vehicle's dynamics and of its environment. Vehicle dynamics is characterized by pre-computed functions for accelerating and braking to a given speed. Environment is modeled by a function of time giving the free distance ahead of the controlled vehicle under the assumption that the obstacles are either fixed or are moving in the same direction. The main result is a control policy enforcing the vehicle's speed so as to avoid collision and efficiently use the free distance ahead, provided some initial safety condition holds. The studied principle is applied to the design of two discrete controllers, one synchronous and another asynchronous. We show that both controllers are safe by construction. Furthermore, we show that their efficiency strictly increases for decreasing granularity of discretization. We present implementations of the two controllers, their experimental evaluation in the Carla autonomous driving simulator and investigate various performance issues.

Systems and Control,Formal Languages and Automata Theory,Software Engineering
Structured road-oriented motion planning and tracking framework for active collision avoidance of autonomous vehicles

ZiWei Zhang,Ling Zheng,YiNong Li,PengYun Zeng,YiXiao Liang

DOI: https://doi.org/10.1007/s11431-021-1880-1

2021-09-27

Science China Technological Sciences

Abstract:This paper proposes a novel motion planning and tracking framework based on improved artificial potential fields (APFs) and a lane change strategy to enhance the performance of the active collision avoidance systems of autonomous vehicles on structured roads. First, an improved APF-based hazard evaluation module, which is inspired by discrete optimization, is established to describe driving hazards in the Frenet-Serret coordinate. Next, a strategy for changing lane is developed in accordance with the characteristics of the gradient descent method (GDM). On the basis of the potential energy distribution of the target obstacle and road boundaries, GDM is utilized to generate the path for changing lane. In consideration of the safety threats of traffic participants, the effects of other obstacles on safety are taken as additional safety constraints when the lane-changing speed profile for ego vehicles is designed. Then, after being mapped into the Cartesian coordinate, the feasible trajectory is sent to the tracking layer, where a proportional-integral control and model predictive control (PI-MPC) based coordinated controller is applied. Lastly, several cases composed of different road geometrics and obstacles are tested to validate the effectiveness of the proposed algorithm. Results illustrate that the proposed algorithm can achieve active collision avoidance in complex traffic scenarios.

materials science, multidisciplinary,engineering
Path Planning for Vehicle Active Collision Avoidance Based on Virtual Flow Field

Liu Jian,Ji Jie,Ren Yue,Huang Yanjun,Wang Hong

DOI: https://doi.org/10.1007/s12239-021-0134-z

2021-01-01

International Journal of Automotive Technology

Abstract:According to the inherent nature of the fluid that can naturally avoid obstacles, a path planning method for active collision avoidance of autonomous vehicles is presented based on the virtual flow field. Firstly, the mathematical model of the virtual flow field on the road is established by using the theory of hydrodynamics. Then a fifth degree polynomial curve is adopted to construct the virtual hazard area of the obstacle vehicle to prevent the fluid into this area, and it can be easily resized by adjusting the parameters of the lateral and longitudinal safety distance. Finally, Computational Fluid Dynamics (CFD) simulations are performed to quantitative predict the dynamic behavior of the ego vehicle on the straight or curved road and the desired path for active collision avoidance can be determined based on the calculation result of the flow field. The simulation results show that the proposed path planning method takes into account the dynamic characteristics and kinematic constraints of the vehicle, and ensures that the vehicle doesn’t collide with the dynamic and static obstacles on the road.
Dynamic Path Planning for Autonomous Driving on Branch Streets With Crossing Pedestrian Avoidance Guidance

Wenjing Wu,Hongfei Jia,Qingyu Luo,Zhanzhong Wang

DOI: https://doi.org/10.1109/access.2019.2938232

IF: 3.9

2019-01-01

IEEE Access

Abstract:This paper presents a real-time dynamic path planning method for autonomous driving to avoid collision with crossing pedestrian on branch streets. The velocity obstacle algorithms are introduced to pick up the collision-free velocities for vehicles. In this method, the curvilinear lane edges are considered as static obstacle while crossing pedestrians and approaching vehicles are considered as velocity obstacles. The paths planning of vehicles are optimized by considering the delay minimum and comfort of drivers under the constraints of appropriate parameters for veer, throttle, or brake systems. A single vehicle's path planning and multi-vehicles 'coordinated or uncoordinated paths planning with crossing pedestrian collision avoidance are experimentally simulated including the longitudinal and lateral motions planning of vehicles. The simulation results demonstrate the effectiveness of the proposed method and indicate its wide practical application on autonomous driving to improve the traffic safety of branch streets.

computer science, information systems,telecommunications,engineering, electrical & electronic

Path Planning and Tracking for Vehicle Collision Avoidance in Lateral and Longitudinal Motion Directions

Robust Hierarchical Model Predictive Control for Trajectory Tracking with Obstacle Avoidance

A Lane Changing Time Point and Path Tracking Framework for Autonomous Ground Vehicle

Path-Tracking Algorithms for Collision Avoidance

Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Path Planning and Tracking for Vehicle Collision Avoidance Based on Model Predictive Control With Multiconstraints

Conclusions and Future Works

Simulation research on emergency path planning of an active collision avoidance system combined with longitudinal control for an autonomous vehicle

Personalized motion planning and tracking control for autonomous vehicles obstacle avoidance

Path Tracking and Handling Stability Control Strategy With Collision Avoidance for the Autonomous Vehicle Under Extreme Conditions

Longitudinal Predictive Control for Vehicle-Following Collision Avoidance in Autonomous Driving Considering Distance and Acceleration Compensation

Optimal Control-Based Online Motion Planning For Cooperative Lane Changes Of Connected And Automated Vehicles

Integrated Avoid Collision Control of Autonomous Vehicle Based on Trajectory Re-Planning and V2V Information Interaction

Path Planning and Obstacle Avoidance Control for Autonomous Multi-Axis Distributed Vehicle Based on Dynamic Constraints

Efficient Path Planning and Tracking Control of Autonomous Vehicles in Park Scenarios Based on Sparrow Search and Stepwise Prediction

Collision Avoidance Motion Planning for Connected and Automated Vehicle Platoon Merging and Splitting with a Hybrid Automaton Architecture

Safe and efficient collision avoidance control for autonomous vehicles

Structured road-oriented motion planning and tracking framework for active collision avoidance of autonomous vehicles

Path Planning for Vehicle Active Collision Avoidance Based on Virtual Flow Field

Dynamic Path Planning for Autonomous Driving on Branch Streets With Crossing Pedestrian Avoidance Guidance