Abstract:Existing studies about concrete-filled FRP tubes (CFFTs) are generally focused on their behaviour under axial load, which have demonstrated their excellent compressive ductility. For their applications in regions with seismic risk, longitudinal reinforcements should be provided for CFFTs in order to ensure their ability to resist bending moments. In published literatures, longitudinal reinforcements for CFFTs were mostly steel rebars or FRP rebars, while only limited studies were about CFFTs reinforced with profiledsteel. Against this background, 6 circular large-scale CFFTs consisting of H-steel with shear studs (HS-CFFTs) were investigated experimentally under combined axial load and lateral cyclic load to study their seismic behaviour. These HS-CFFTs were designed with a total height of 2150 mm and a concrete diameter of 300 mm, and the testing parameters included the FRP thickness (tfrp = 4.0 mm - 6.0 mm), the axial load ratio (n = 0.2 - 0.33), as well as the area ratio of Hsteel (rho = 4.54% - 5.67%). Test results indicated that, (1) HS-CFFTs exhibited rounded hysteretic curves with ample energy dissipation capacity; (2) the H-steel experienced no local buckling due to the effective concrete support and the sufficient FRP confinement; (3) the FRP tube thickness was positively correlated with the peak lateral load and the ductility of HS-CFFTs; compared with HS-CFFTs with tfrp = 4 mm, HS-CFFTs with tfrp = 6 mm had a higher peak load FP (7.3% - 7.4% higher) and a larger ductility index 14 delta (3.4% - 11.7% higher); (4) increasing the H-steel ratio could effectively improve the seismic performance of HS-CFFTs; HSCFFTs with rho = 5.67% had higher peak load (2.5% - 10.0% higher) compared with those with rho = 4.54%; (5) the ductility of HS-CFFTs would decrease obviously as the axial load ratio increased; the ductility index 14 delta for HSCFFTs with n = 0.33 was smaller (14.1% - 25.0% lower) than the counterparts with n = 0.2. A numerical model incorporating with "NonlinearBeamColumn" elements as well as specific constitutive models for the FRP tube, the H-steel and the concrete core was established on the OpenSees platform. The proposed numerical model provided a simple, computationally efficient and reasonably accurate approach for simulating the hysteretic behaviour of HS-CFFTs.

Lateral Force-Resisting Behavior of GFRP-tube Reinforced Concrete-Filled Multicellular Steel Tubular Shear Walls under Cyclic Loads

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Low Cyclic Fatigue Performance of Concrete-Filled Steel Tube Columns

Numerical Study on Concrete Filled GFRP-Steel Tube under Cyclic Loading

Behavior of Cross Arms Inserted in Concrete-Filled Circular GFRP Tubular Columns

Experimental and Analytical Study of Hollow Section Concrete-Filled GFRP Tubes in Bending

Analytical Modeling Approaches for the Cyclic Behavior of Concrete-Filled Circular Filament Wounded GFRP Tube Columns

Concrete-Filled Multicellular Steel-Tube Shear Walls with FRP Tubes Embedded in CFST: Concept and Seismic Performance

Determining Experimental Ductile Behavior of Composite Walls Considering Second-Order Effects: A Case Study for Multi-Celled CFST Walls

Experimental and Numerical Simulation of Reinforced Concrete-Filled Square GFRP Tubular Columns under Axial Compression

Numerical Response of Concrete-Filled Steel Tubular (CFST) Columns Externally Strengthened with FRP Composites Subjected to Cyclic Loading

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Seismic behavior of I-steel reinforced concrete-filled GFRP tubular columns

Seismic performance of circular concrete-filled FRP tubes consisting of H-steel with shear studs: Experimental study and numerical modelling

Experimental Research on Concrete-Filled GFRP Tubes and GFRP-Steel Composite Tubes under Axial Compressive Load

Cyclic behavior of concrete‐encased high‐strength concrete‐filled steel tube composite walls: An experiment

Cyclic behavior of high-strength concrete shear walls with high-strength reinforcements and boundary CFST columns

Behavior and modeling of large-scale concrete-filled FRP tubes with longitudinal steel rebars under lateral impact loading

Behaviors of FRP confined rectangular concrete-filled thin-walled steel tubular stub columns using high-strength materials under axial load