Abstract:Abstract In the present paper, a novel pretreatment process for SiC particulate and a new mechanical–electromagnetic combination stirring process for fabricating Zn–Al(ZA27)/SiCp composites are described. The optimal pretreatment route and the most appropriate SiC particle parameters were experimentally determined. The pretreated SiC particles were easily incorporated and dispersed in the ZA27 alloy melt and were not agglomerated before addition to the melt. The surface status of the SiC particles before and after pretreatment was observed and analysed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and transmission electron microscopy. It was found that gas existing on the SiC particle surfaces by physical and chemical absorption was a significant hindrance to the incorporation and dispersion of SiC particles in the alloy melt. The gas absorption was induced by ultrafine SiC powders, fracture steps, and ions existing on the SiC particle surfaces. The carbon, silicon, and oxygen contents on the SiC surface were varied with different pretreatment techniques. Moreover, a dense layer of amorphous SiO2, which improves wetting of SiC particles in the ZA27 melt, was formed owing to calcination of SiC particles in air. The new combined stirring process exploits the advantages of both mechanical and electromagnetic stirring of the melt at the different processing stages during fabrication. The microstructural characteristics of the resulting composites are: homogeneously distributed SiC particles, fewer macro gas blows and inclusions, and little shrinkage porosity in comparison to composites fabricated by a mechanical stirring process. Finally, the mechanisms of degassing and reducing the porosity and the number of oxide inclusions are discussed.

Preparation and Characterization of SiC-ZAC Composite Material for Immobilizing the Simulated Radioactive Graphite

Preparation and Properties of Situ-Sintered SiC Ceramics Aided by ZnO-Al2O3-CaO

Synthesis and Characterization of SiC Based Composite Materials for Immobilizing Radioactive Graphite

Immobilization Behavior of Cerium Ions in the Zirconolite Ceramic Solidified Radioactive Waste Forms

Design and mechanical properties of SiC reinforced Gd2O3/6061Al neutron shielding composites

Preparation and Properties of C/SiC Composites Reinforced by High Thermal Conductivity Graphite Films

Preparation of SiC Coated Graphite Composite Powders by Nitriding Combustion Synthesis

Pretreatment Process of SiC Particles and Fabrication Technology of SiC Particulate Reinforced Zn–Al Alloy Matrix Composite

ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders

Study on Agglomeration Conditions and Reactivity of Carbon–Silicon Composite Agglomerate

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Ablation behavior and mechanism of SiCnw modified SiC-ZrC coating for graphite under a plasma ablation flame

Facile Preparation of a SiC@SiO2 Nanowire-Toughened ZrB2–SiC/SiC Bilayer Coating with Good Interfacial Bonding, High Toughness, and Excellent Cyclic Ablation Resistance on C/CA Composites

Fabrication and Characterization of ZrO_2/SiC Composite Materials

Investigations of the effect of Si addition on graphite elimination and the oxidation behavior of SiC joint using Inconel 625 powder filler

Fabrication and Ablation Properties of SiC Nanowires-Network Modified Carbon/Carbon–Ultrahigh Temperature Ceramics Composites

The Thermal Stability, Ablation Properties, Creamization Mechanism of Graphite/Zirconia (ZrO2)/Silicone Rubber Composites Containing Carbon Multicomponent Systems

Mechanical and Ablation Properties of Three-Dimensional ZrC Skeleton Reinforced Graphite-Based Composites

Ablation behaviour of Csf/ZrB2-SiC composites fabricated by direct ink writing and reactive melt infiltration