Abstract:An accurate determination of the contact pressure and local sliding in a cold rolling process is an essential step towards the prediction of the roller’s life due to wear damage. This investigation utilized finite element analysis to quantify the local contact pressure and local sliding over the rolling bite in a plate cold rolling process. It was the first study to quantify the local sliding distance in a rolling process using the Finite Element Analysis (FEA). The numerical results indicate that the local contact pressure over the rolling bite demonstrates a hill profile, and the peak coincides with the neutral plane. The local sliding distance over the rolling bite demonstrates a double-peak profile with the two peaks appearing at the forward slip and backward slip zones respectively. The amplitude of sliding distance in the backward slip zone is larger than that in the forward slip zone. A stick zone was confirmed between the forward slip and backward slip zones. According to a parametric study, the local contact pressure and sliding distance decrease when the thickness reduction is reduced or the diameter of the roller is decreased. The location of the neutral plane always presents at the rolling exit side of the rolling bite’s center. The size of the stick zone enlarges and the sizes of slip zones shrink significantly when the friction coefficient is increased. Finally, a novel concept of wear intensity was defined to examine the wear of the roller based on the local contact pressure and local sliding distance. The results show that a two-peak wear response exists in the backward and forward slip zones. The magnitude of the wear in the backward slip zone is larger than that in the forward slip zone. For a given roller and blank material combination, using a smaller thickness reduction, a smaller diameter roller and a higher friction coefficient condition can reduce the wear of the roller for a single rolling cycle. The current paper develops an understanding of rolling contact responses to the wear of the roller in rolling process. The research method can also be applied to study other rolling or sliding wear problems.

On Thermal Reduction Factor for Elastohydrodynamic Film Thickness in Rolling/Sliding Contacts

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

Elastohydrodynamic Film Thickness in Elliptical Contacts with Spinning and Rolling

A Full Numerical Solution for the Thermoelastohydrodynamic Problem in Elliptical Contacts

The Relationship Between Friction and Film Thickness in EHD Point Contacts in the Presence of Longitudinal Roughness

Influence of Thermal Effects on Elastohydrodynamic (EHD) Lubrication Behavior at High Speeds

Thermal Effects on the Film Thickness in Elliptic EHL Contacts With Entrainment Along the Major Contact Axis

A Numerical Study on Contact Condition and Wear of Roller in Cold Rolling

Scale and Contact Geometry Effects on Friction in Thermal EHL: Twin-Disc Versus Ball-on-disc

Effect of Thermal Properties of A Coated Elastohydrodynamic Lubrication Line Contact under Various Slide-To-Roll Ratios

EHL Film Thickness Limitation Theory Under a Limiting Shear Stress

Thermal Elastohydrodynamic Lubrication Analysis For Point Contact Transmission

An Analysis of Elastohydrodynamic Lubrication with Limiting Shear Stress: Part I—Theory and Solutions

A Lubrication Deviation From the Classical EHL Theory by the Lubricant Viscoplasticity: Part I - Film Thickness Dependence

Mixed Elastohydrodynamic Lubrication in Finite Roller Contacts Involving Realistic Geometry and Surface Roughness

Film Thickness Changes in EHD Sliding Contacts Lubricated by a Fatty Alcohol

Elastohydrodynamic Lubrication of Soft, Highly Deformed Contacts

Prediction of oil-film thickness and shape in elliptical point contacts under combined rolling and sliding motion

About the Load-Carrying Capacity of Elastohydrodynamic Lubrication Film

Effects of boundary slips on thermal elastohydrodynamic lubrication under pure rolling and opposite sliding contacts

Experimental investigation of the film behavior in a model rolling bearing