Abstract:With the rapid development of key industries such as new energy vehicles, smart homes, smart phones and consumer grade drones, the demand for high performance miniature micro- pressure sensors is also growing promptly. At prssent, most of the pressure sensors of this type adopt a C-type structure, and the thickness of the sensitive diaphragm needs to be continuously thinned in order to improve the sensitivity of this type sensor, which leads to its sensitivity to etching errors and makes it difficult to ensure the linearity of the pressure sensor. Based on this, we designed a miniature micro-pressure half active Wheatstone bridge piezoresistive pressure sensor with C-type square diaphragm structure, whose area is reduced by shortening the number of leads and pads, through ion impantation on the surface of the diaphragm to create a piezoresistors, using deep reactive ion etching (DRIE) technology to release the pressure sensitive diaphragm with length of 460 μm × 460 μm, thinkness of 7.5 μm. The buried oxygen layer in the SOI(silicon on insulator) can play a role of stopping the etching, which assures the uniformity of the released sensitive diaphragm and the non-linear errors of the sensor while maintains its sensitivity. In this paper, the influence of piezoresistor position offset on the performance of the pressure sensor is analyzed by means of simulation, which improves the accuracy of the designed model and guarantees its performance parameters can meet the design indicators. Finally, the static characteristics of the sensor is calibrated. The experimental results show that the sensitivity of the sensor is up to 0.538 mV kPa-1/3.5 V in the range of 40 kPa at room temperature, and the non-linear error is only 0.386 % FS. This study provides some new ideas and references for the design work of high performance micro-pressure sensors.

Diamond-like carbon based micro-pressure sensor with ultra-thin sensitive membrane

Self-Supporting Ultrathin DLC/Si3N4/SiO2 for Micro-Pressure Sensor

Self-Supporting Ultrathin DLC/Si 3 N 4 /SiO 2 for Micro-Pressure Sensor

MXene@CTAB@CMF Three-Dimensional Elastic Base for Piezoresistive Pressure Sensors Realized by Electrostatic Self-Assembly

Micro Pressure Sensors Based on Ultra-thin Amorphous Carbon Film as both Sensitive and Structural Components

Thin Diamond Film on Silicon Substrates for Pressure Sensor Fabrication

Mechanical Structural Design of a Piezoresistive Pressure Sensor for Low-Pressure Measurement: A Computational Analysis by Increases in the Sensor Sensitivity

Ultra-sensitive flexible pressure sensor with hierarchical structural laser-induced carbon nanosheets/carbon nanotubes composite film

Diamond and diamond-like carbon MEMS

Fabrication of High Sensitivity Carbon Microcoil Pressure Sensors

The Development of a New Piezoresistive Pressure Sensor for Low Pressures

A high pressure sensor with circular diaphragm based on MEMS technology

A piezoresistive pressure sensor with centralized piezoresistors and a diamond-shape composite diaphragm

A Novel Pressure Microsensor with 30- $\mu \Hbox{m}$-Thick Diaphragm and Meander-Shaped Piezoresistors Partially Distributed on High-Stress Bulk Silicon Region

Design and fabrication of a tiny micro-pressure sensor with improved linearity and sensitivity

The Design and Analysis of Piezoresistive Shuriken-Structured Diaphragm Micro-Pressure Sensors

Thin and soft Ti3C2Tx MXene sponge structure for highly sensitive pressure sensor assisted by deep learning

A High Sensitive Pressure Sensor with the Novel Bossed Diaphragm Combined with Peninsula-Island Structure

Differential Pressure Sensors Based on Transfer-Free Piezoresistive Layered PdSe2thin Films.

3D-Ordered Multilevel Microstructures-Based Flexible Pressure Sensor with Ultra-High Sensitivity Utilizing Laser Scribing.