Abstract:Based on the demand for monitoring conductivity, temperature and depth (CTD) in the ocean, a cascaded-coated long-period fiber grating and fiber Bragg grating structure (LPG–FBG) is proposed, which could eliminate the mutual interference of CTD in the measurement. Firstly, according to the coupled mode theory and phase matching conditions, the coupling equation of each segment of grating is deduced. Next, through the difference iterative method, the total transfer matrix of cascaded LPG–FBG is obtained. Then, to improve the sensitivity of the sensor and make the demodulation more accurate and convenient, the structure of the grating is optimized. On the basis of the above, the transmission spectrum of the structure is simulated and three peaks formed by coupling the forward core mode with the forward cladding mode in LPG ( ), the backward cladding mode in FBG ( ) and the backward core mode in FBG ( ) are investigated. Furthermore, the sensing characteristics of surrounding refractive index (SRI), temperature and pressure of the peaks are analyzed, and the three peaks show different sensitivity to marine environmental parameters. Therefore, a three-parameter matrix equation is established, and the three parameters can be measured simultaneously without interference. Simulation results indicated that the transmittances of all transmission peaks are lower than 0.5, the full width at half maxima of all transmission peaks is less than 7 nm, and the linearity of the three transmission peaks to three parameters is larger than 0.999. The maximum sensitivities of three transmission peaks to SRI, temperature and water pressure are − 440 nm/RIU, − 1375.67 pm/°C and − 10.87 nm/Mpa, respectively. Compared with the other three-parameter sensors used in ocean, the proposed cascaded-coated LPG–FBG structure has simple structure, high sensitivity and good linearity, which makes this structure have great application potential in the fields of multiparameter sensing and segmented sensing in marine environment.

Distributed Salinity Sensor Based on Brillouin Dynamic Grating

Distributed Salinity Sensing Based on Brillouin Dynamic Grating

Distributed Salinity Sensor with a Polyimide-Coated Photonic Crystal Fiber Based on Brillouin Dynamic Grating

Bragg Grating Chemical Sensor with Hydrogel As Sensitive Element

Fiber Bragg Grating Salinity Sensor Array Based on Fiber Tapering and HF Etching

A Seawater Salinity Sensor Based on Optimized Long Period Fiber Grating in the Dispersion Turning Point

High-sensitive Distributed Transverse Load Sensing Based on Brillouin Dynamic Gratings

High-Sensitivity Distributed Transverse Load Sensor with an Elliptical-Core Fiber Based on Brillouin Dynamic Gratings

Development of FBG Salinity Sensor Coated with Lamellar Polyimide and Experimental Study on Salinity Measurement of Gravel Aquifer

High-Sensitivity Seawater Salinity Sensing with Cladding Etched Fiber Bragg Grating Technology

Theoretical and experimental characterization of a salinity and temperature sensor employing optical fiber surface plasmon resonance (SPR)

High-sensitivity biconical optical fiber SPR salinity sensor with a compact size by fiber grinding technique

Distributed salinity sensor based on optical frequency domain reflectometry with polyimide coated single mode fiber

High-Sensitivity Salinity Sensor Based on Helical Long-Period Fiber Grating in Thin-cladding Fiber

Groundwater salinity sensing using PI-FBG with improved capillary coating method

Dual-channel in-fiber SPR sensor for simultaneous and highly sensitive measurement of salinity and temperature

Design and simulation of a cascaded-coated LPG–FBG sensor structure for simultaneous monitoring of CTD in ocean

Integrated and compact fiber-optic conductivity-temperature-depth (CTD) sensor for marine detection

Seawater salinity sensor based on dual resonance peaks long period fiber grating and back propagation neural network

Dual-Parameter Fiber Sensors for Salinity and Temperature Measurement Based on a Tapered PMF Incorporated With an FBG in Sagnac Loop

High-sensitivity optical fiber SPR sensor with cascaded biconical fiber and hetero-core structure for simultaneous measurement of seawater salinity and temperature