Abstract:In this research, engineered biochar and hydrochar derived from paddy husk were compared for the adsorption tetracycline (TC) in water effluents . Biochar was produced at three different pyrolysis temperatures (e.g., 250 °C, 300 °C and 350 °C) while hydrochar was produced using three different HTC temperatures (e.g., 180 °C, 200 °C and 220 °C). The adsorptive experiments were performed for both biochar and hydrochar using well-defined experimental conditions: pH (3); initial TC concentration (10 mg/L); adsorbent dosage (1 g/L); and temperature (27 °C) to study their adsorptive performances (q e in mg/g). After selecting the best q e values for both biochar and hydrochar, both materials were modified using 20% H 3 PO 4 . A comprehensive scientific evaluation of both engineered biochar (EBC 350) and hydrochar (EHC 220) was performed using adsorption isotherm, adsorption kinetics, rate-limiting, and thermodynamics tests along with their characterization using FTIR and point of zero charge (pzc). The effects of temperature, dosage, and initial TC concentration on the adsorption process were studied for both EBC 350 and EHC 220. Acid activation improved the adsorptive performance of EHC 220 almost four times (from 1.9 to 7.5 mg/g), whereas adsorptive performance of EBC 350 improved 2.4 times from 3.8 to 9.1 mg/g. The best pH for TC adsorption onto EHC 220 was 5, whereas it was 3 for EBC 350. EBC 350 exhibited a good fit with the Freundlich model, whereas EHC 220 followed the Langmuir model. At 100 mg/L TC concentration, EHC 220 exhibited higher q e value (46.9 mg/g) compared to EBC 350 (41.7 mg/g). The Pseudo-first order kinetic model was the best fit for EHC 220 adsorption, whereas Pseudo-second order model was most suitable for EBC 350. The adsorption mechanisms involved in TC adsorption by EHC 220 included hydrogen bonding, hydrophobic effect, and π−π interaction, whereas cation exchange, mass diffusion, and π−π interaction were involved for EBC 350. The results of this study will facilitate the development of cost-effective filters with the incorporation of engineered biochar/engineered hydrochar for the active removal of emerging contaminants, like tetracycline, from wastewater so as to increase its reusable potential.

HKUST-1 derived carbon adsorbents for tetracycline removal with excellent adsorption performance

HKUST-1-Derived Cu@Cu(I)@Cu(II)/Carbon Adsorbents for Ciprofloxacin Removal with High Adsorption Performance

Effectively removing tetracycline from water by nanoarchitectured carbons derived from CO2: Structure and surface chemistry influence

Insights into the adsorption mechanism of tetracycline on hierarchically porous carbon and the effect of nanoporous geometry

Insights into High-Efficient Removal of Tetracycline by a Codoped Mesoporous Carbon Adsorbent

An effective strategy for removing tetracycline from water: Enhanced adsorption reliability and capacity by tyrosine modified layered hydroxides

Cu-Co bimetallic organic framework as effective adsorbents for enhanced adsorptive removal of tetracycline antibiotics

Adsorption of tetracycline using one-pot synthesis zirconium metal-organic framework (UiO-66) decorated hydroxyapatite

A Novel Porous Carbon Derived from Hydrothermal Carbon for Efficient Adsorption of Tetracycline

Hierarchical porous carbon materials derived from a waste paper towel with ultrafast and ultrahigh performance for adsorption of tetracycline

Batch and Continuous Fixed-bed Column Adsorption of Tetracycline by Biochar/MOFs Derivative Covered with κ-Carrageenan/Calcium Alginate Hydrogels

Magnetic porous carbons derived from metal-organic frameworks for effective adsorption of tetracycline

ZIF-mediated N-doped hollow porous carbon as a high performance adsorbent for tetracycline removal from water with wide pH range

Efficient Removal of Tetracycline from Wastewater Via KHCO3-activated Biochar: Characterization, Performance, and Mechanism

Insight into the key factors and mechanism of excellent tetracycline adsorption on amorphous cobalt carbonate nanosheets

N self-doped hierarchically porous carbon derived from biomass as an efficient adsorbent for the removal of tetracycline antibiotics

Examining the adsorption efficiency of iron oxide-decorated magnetic halloysite nanotubes for tetracycline elimination from solutions

Heterogeneous nucleation and synthesis of carbon dots hybrid Zr-based MOFs for simultaneous recognition and effective removal of tetracycline

Ultrahigh Adsorption of Typical Antibiotics Onto Novel Hierarchical Porous Carbons Derived from Renewable Lignin Via Halloysite Nanotubes-Template and In-Situ Activation

Porous biochar derived from walnut shell as an efficient adsorbent for tetracycline removal

Adsorptive behavior of engineered biochar /hydrochar for tetracycline removal from synthetic wastewater