Abstract:A corn stalk cellulose-based adsorbent was reasonably designed and synthesized by two steps of modification to effectively remove Cd(II) and Ni(II) from wastewater of nickel–cadmium (Ni–Cd) and nickel-metal hydride (Ni-MH) batteries. Glycidyl methacrylate (GMA), N,N-methylene-bis- acrylamide (MBA), and potassium persulfate (KSP) was selected as the grafting monomer, cross-linking agent and initiator, respectively, in the first step to introduce enough epoxy groups and generate three dimensional (3D) network structures on the cellulose (Cell) surface. Under the optimum conditions of weight ratio of GMA: Cell = 3:1, 20 mmol L–1 KSP, 5.0 wt.% of MBA to Cell and 60°C for 2 h, the maximum grafting efficiency and the amount of epoxy groups could reach 93.69% and 4.96 mmol g–1, respectively. Then this grafted and cross-linked product (Cell-g-GMA-c-MBA) was further reacted with diethylenetriamine (DETA) to introduce amino groups on the adsorbent. The final adsorbent (Cell-g-GMA-c-MBA-DETA) with the maximum amount of 7.20 mmol g–1 amino groups was obtained under the optimized amination conditions. The experiment results showed that the maximum adsorption capacity of Cd(II) and Ni(II) on Cell-g-GMA-c-MBA-DETA could reach 367.3 and 295.9 mg g–1, respectively at 45°C and pH = 4.5. The detailed investigation on relationships between microstructures and adsorption performances of Cell-g-GMA-c-MBA-DETA proved that the introduced sufficient amino groups were the major adsorption sites to adsorb Cd(II) and Ni(II). Cd(II) was inclined to be adsorbed by forming chelation complexes with 2–3 mmol N atoms from amino groups while the adsorption of Ni(II) would require at least 1 mmol N atom from amino groups by accepting lone-pair electrons and forming coordinate bonds. This modified cellulose also displayed a good reproducibility, whose regeneration efficiency for adsorbing Cd(II) and Ni(II) after sixth cycles were still 80% and 82%, respectively. It could be considered as a promising material for effective removal of Cd(II) and Ni(II) from batteries wastewater.

Controllable Synthesis of Bifunctional Corn Stalk Cellulose As a Novel Adsorbent for Efficient Removal of Cu2+ and Pb2+ from Wastewater.

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Optimum synthesis of an amino functionalized microcrystalline cellulose from corn stalk for removal of aqueous Cu2+

3D Porous Tubular Network-Structured Chitosan-Based Beads with Multifunctional Groups: Highly Efficient and Selective Removal of Cu2+

Facile in situ synthesis of cellulose microcrystalline-manganese dioxide nanocomposite for effective removal of Pb(II) and Cd(II) from water

A Simple Low-Cost Method to Prepare Lignocellulose-Based Composites for Efficient Removal of Cd(II) from Wastewater

A novel chitosan/cellulose phosphonate composite hydrogel for ultrafast and efficient removal of Pb(II) and Cu(II) from wastewater

Synthesis of cubic mesoporous silica SBA16 functionalized with carboxylic acid in a one-pot process for efficient removal of wastewater containing Cu 2+ : Adsorption Isotherms, Kinetics, and Thermodynamics

Resource utilization of wastepaper and bentonite: Cu(II) removal in the aqueous environment

Environmental application of dicarboxylated hairy cellulose crosslinked with calcium for removal and confining of Pb(II)

All-biomass cellulose/casein adsorbent fabricated via the "green solvent system" of ionic liquid for the efficient removal of Cu(II), Cd(II) and Pb(II)

Synthesis and Adsorption Properties of Novel Bacterial Cellulose/Graphene Oxide/Attapulgite Materials for Cu and Pb Ions in Aqueous Solutions

Fabrication of a corn stalk derived cellulose-based bio-adsorbent to remove Congo red from wastewater: Investigation on its ultra-high adsorption performance and mechanism

Reasonable design of a corn stalk cellulose-based adsorbent for adsorption of Cd(II) and Ni(II): adsorption behaviors and mechanisms

Two all-biomass cellulose/amino acid spherical nanoadsorbents based on a tri-aldehyde spherical nanocellulose II amino acid premodification platform for the efficient removal of Cr(VI) and Cu(II)

A Novel Adsorbent of Core-Shell Construction of Chitosan-Cellulose Magnetic Carbon Foam: Synthesis, Characterization and Application to Remove Copper in Wastewater

Concurrent elimination and stepwise recovery of Pb(II) and bisphenol A from water using β–cyclodextrin modified magnetic cellulose: adsorption performance and mechanism investigation

Low-Cost Biosorbents Derived from Corn Husks for the Exclusion of Fe(II) and Cr(VI) Ions Undertaken Aqueous Media: Application for Wastewater Treatment

Cellulose phosphonate/polyethyleneimine nano-porous composite remove toxic Pb(II) and Cu(II) from water in a short time

Low-temperature aerobic carbonization and activation of cellulosic materials for Pb2+ removal in water source

Polyethylenimine‐modified sugarcane bagasse cellulose as an effective adsorbent for removing Cu( II ) from aqueous solution