Fabrication Of Heat-Resistant Grids And Their Application To Deformation Measurements Using A Sampling Moire Method

Yangyang Li,Qi Zhang,Huimin Xie

DOI: https://doi.org/10.1088/1361-6501/ac0371

IF: 2.398

2021-01-01

Measurement Science and Technology

Abstract:Heat-resistant grids are important sensing elements for deformation measurements that use the sampling moire method at high temperatures. To satisfy the fabrication demand for heat-resistant grids for the sampling moire method, an etched-paint-film grid-fabrication technique using a laser-marking technique is proposed in this study. First, the important factors influencing the fabrication process are experimentally studied, and grids with a pitch of several hundred microns are successfully fabricated using the nickel-based superalloy GH4169. The experimental results at high temperatures show that the self-developed grids have high temperature resistance at up to 1050 degrees C. Furthermore, to minimize the thermal disturbance involved in sampling moire measurements at high temperatures, an image grayscale-averaging technique is introduced to improve the measurement accuracy of the high-temperature deformation fields. As example applications, the elastic constants at 20 degrees C/650 degrees C and the thermal expansion coefficients (up to 1050 degrees C) of GH4169 are accurately measured using the sampling moire method. The experimental results confirm the feasibility of the sampling moire method and our self-developed heat-resistant grids for characterizing the thermomechanical parameters of materials. The technique for fabricating heat-resistant grids proposed in this work is suitable for various metal materials, and has good application potential for use in high-temperature deformation measurements.