Abstract:To evaluate the residual stress distribution along cutting direction in hard turning process, an explicit dynamic thermo-mechanical orthogonal Finite Element Model (FEM) is developed to consider the correlation between residual stress distribution and chip morphology and plough effect by cutting edge. The FEM adopts Johnson-Cook (J-C) model to describe work material property, the critical equivalent plastic strain criterion to simulate chip separation behavior, and the revised coulomb's law to capture the friction pattern between the tool and chip interface. The FEM is validated by comparing the predicted and experimental chip morphology and residual stress distribution. The residual stress distribution in hard machined surface along cutting direction is accurately captured by using sharp and honed cutting edge tools. The residual stresses by sharp tool demonstrate a periodical characteristic, the fluctuation amplitudes are determined in the surface and subsurface along the cutting direction, and the fluctuation frequency corresponds to that of the saw-tooth chip. However, the residual stresses by honed cutting edge tool demonstrate an indistinct periodic characteristic, the fluctuation frequency in surface and subsurface is larger than that of the saw-tooth chip. Saw-tooth chip formation process by sharp tool is identified to analyze the residual stress scatter periodic mechanism, which associates with the fluctuation of cutting force and temperature. The plough process by honed cutting edge tool is identified to explain the equilibrium effect on the amplitude and frequency of residual stress scatter in hard turned surface and subsurface. The periodical fluctuation characteristics of residual stress in hard turned surface and subsurface is revealed and verified by determining its amplitude and frequency corresponding to that of the saw-tooth chip. The analysis will enhance the fatigue life prediction accuracy by incorporating the effect of residual stresses periodical fluctuation on the crack initiation and propagation life in hard turned surface and subsurface.

A New Strategy to Reduce Edge Chipping Using Stress Wave Impedance Matching

Simulation of Chip Formation in High-Speed Hard Machining

On the Mechanism of Edge Chipping Reduction in Rotary Ultrasonic Drilling: A Novel Experimental Method

Investigations on the edge-chipping reduction in rotary ultrasonic machining using a conical drill

Simulation of Edge Chipping in Laser-Assisted Milling of Silicon Nitride Ceramics Using the Xefm

Modeling the Dependency of Edge Chipping Size on the Material Properties and Cutting Force for Rotary Ultrasonic Drilling of Brittle Materials

Edge Chipping of Rock: an Experimental Study

Investigation on the Edge Chipping in Ultrasonic Assisted Sawing of Monocrystalline Silicon

Reduction of Edge Chipping in Rotary Ultrasonic Machining by Using Step Drill: a Feasibility Study

Reducing Edge Chipping Defect in Rotary Ultrasonic Machining of Optical Glass by Compound Step-Taper Tool

Numerical Analysis in Double-Sided Polishing: Mechanism Exploration of Edge Roll-Off

Optimizing tool life in SiCp/Al composites milling with acoustic emission analysis: A comprehensive monitoring and implementation strategy

Edge chipping characteristics in grinding SiCf/SiC composite

Research on the Ductile Chip Formation in Grinding of Brittle Materials

The Periodical Fluctuation of Residual Stress in Hard Turned Surface and Its Relationship with Chip Formation

Study on the edge defects of high volume fraction 70% SiCp/Al composites in ultrasonic-assisted milling

Edge damage prediction and analysis of ceramic restorations in ultrasonic-assisted dental grinding based on a multi-grit finite element model

Fragmented Chip Formation Mechanism in High-Speed Cutting from the Perspective of Stress Wave Effect

Study on Edge-forming Mechanism for Aspheric Surface Compliant Polishing

Chatter Suppression With Piezoelectric Film For Microstructure Surface Structuring

Study on formation mechanism of edge defects of high-volume fraction SiCp/Al composites by longitudinal-torsional ultrasonic vibration-assisted milling