Abstract:Failure processes are common in geomaterials under external loads. In this study, a cohesive fracture model (CFM) and its implementation in a graphical processing unit (GPU)-based discrete element method (DEM) solver is presented within the context of simulating the failure of rock and other geomaterials. The CFM and its GPU implementation advances the simulation of the processes of meso-fracture initiation, propagation, and interaction. The CFM discretizes a domain into a series of pre-defined rigid polyhedral blocks. These blocks are bonded along the contact faces by a cohesive criterion with normal and shear strengths. This poses a computational challenge as few DEM codes can simulate polyhedrons, and amongst those the limited number of particles and required computational run-time make it intractable to do simulations of more than a few thousand polyhedral elements. This makes it computationally infeasible to combine CFM with such DEM models for practical applications. However, the GPU based code Blaze-DEM does allow for simulations of tens of millions of polyhedrons within practical runtimes. In this study we implement the CFM in Blaze-DEM and show the efficiency and usefulness of the model using GPU compute. Two typical examples, including a block sliding along a slope and the fracture process of an arch structure, are used to verify the provided CFM. This is followed by the simulation of Brazilian tests and uniaxial tests of limestone using the CFM that are validated against laboratory experiments. These tests demonstrate that the provided CFM can simulate not only the fracture process well, but also mechanical behaviors at the meso and macro scale of the geomaterials. Furthermore, based on the failure mechanisms of the Brazilian test and uniaxial test, an inversion method is proposed to obtain the mechanical parameters in CFM.

Fragmented Chip Formation Mechanism in High-Speed Cutting from the Perspective of Stress Wave Effect

Simulation of Chip Formation in High-Speed Hard Machining

Finite Element Simulation of High-Speed Cutting

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Understanding The Deformation Of Metals In High Speed Cutting

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Cutting And Fracturing Models Without Remeshing

Study of segmented chip formation in cutting of high-strength lightweight alloys

Discrete element simulation for investigating fragmentation mechanism of hard rock under ultrasonic vibration loading

Chip formation mechanism in machining of Al/SiCp composites based on analysis of particle damage

Research on chip formation parameters of aluminum alloy 6061-T6 based on high-speed orthogonal cutting model

On the mechanism of dislocation-dominated chip formation in cutting-based single atomic layer removal of monocrystalline copper

A Godunov ‐type discrete element model for elastic‐viscoplastic continuum impact problems

Tool-edge geometry effects in semi-to-finish cut machining operations on subsurface integrity and tool thermo-mechanical loadings: A coupled damage-fracture energy based finite element approach

Quasicontinuum Simulations of Nano-cutting Process

A Cohesive Fracture Model for Discrete Element Method Based on Polyhedral Blocks

Large Chip Production Mechanism under the Extreme Load Cutting Conditions

On the Steady-State Workpiece Flow Mechanism and Force Prediction Considering Piled-Up Effect and Dead Metal Zone Formation

Competing Fracture Modeling of Thin Chip Pick-Up Process