Abstract:Refractory high-entropy alloys (RHEAs) composed of Ti, Zr, Hf, and Nb have emerged as promising materials for high-temperature aerospace applications due to their exceptional balance of strength and toughness, coupled with a reduced density and softening resistance. This study delves into the influence of alloy composition on the mechanical properties, a pivotal aspect in the design of RHEAs. We investigate a series of Ti48-xZrxHf26Nb26 (x = 14, 18, 22, 26, 30, 34) alloys, prepared through suction casting and homogenization treatments. The phases, microstructure, and fracture morphology of these alloys are analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and electron backscattered diffraction (EBSD), subsequent tensile tests provide insights into the strength and elongation characteristics of alloys. The homogenized alloys consistently exhibit one BCC phase with equiaxed grains, whereas the fracture mode shifts from intergranular to transgranular, and return to intergranular as the Zr content increases. Experimental results reveal an asymmetry mechanical behavior, alloys with higher Ti content display superior toughness (elongation 17.83% for Ti = 34 at.%) compared to those with higher Zr content (elongation 16.05% for Zr = 34 at.%). Among them, the Ti22Zr26Hf26Nb26 alloy achieves the peak tensile strength of 695.25 MPa, indicating an inverse relationship between strength and toughness. Solid-solution strengthening and chemical short-range orderings emerge as the predominant contributors to the overall strength of the TiZrHfNb alloys. To gain a deeper understanding of the mechanical behavior at the atomic scale, we performed first-principles calculations to investigate the elastic properties and charge density of Ti48-xZrxHf26Nb26 alloys in the BCC structure. These calculations shed light on the underlying mechanisms governing the strength and toughness behavior. The present work offers valuable insights into the design of mechanical properties of TiZrHfNb RHEAs, serving as a paradigm for future materials development in this field.

Improvement of Microstructure and Fracture Toughness of MASC Alloy by Element Substitution of Zr for Hf

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Microstructure and mechanical properties of Nb 16Si alloys with Zr additions

Mechanical properties and microstructure evolution of NbSiZr based alloy

Effects of Si variation and Zr addition on the microstructure, oxidation resistance and mechanical property at 1523 K of Nb-Si-Ti/Zr/Hf-Cr/Al high-entropy superalloys

Microstructures and Mechanical Properties of Cast Nb-Ti-Si-Zr Alloys

Balancing the fracture toughness and tensile strength by multiple additions of Zr and Y in Nb–Si based alloys

Microstructure Characteristics and Elevated-Temperature Tensile Properties of Al-7Si-0.3Mg Alloys with Zr and Hf Addition

Revealing the mechanical behavior of Ti48-xZrxHf26Nb26 high-entropy alloy through zirconium content variations

Revealing the Mechanical Behavior of Ti Zr Hf Nb High-Entropy Alloy Through Zirconium Content Variations

Synergistic Effect of Zr and Hf Alloying on Cross Fluvial Microstructure of CoCrFeNi Eutectic High-Entropy Alloys

Optimization of Zr and Mo element on room-temperature fracture toughness and the integrity of oxide film

EFFECT OF Zr ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NiAl/Cr(Mo)BASE EUTECTIC ALLOY

Microstructure Evolution and Toughening Mechanism of a Nb-18Si-5HfC Eutectic Alloy Created by Selective Laser Melting

Influence of Zr Microalloying on the Microstructure and Room-/High-Temperature Mechanical Properties of an Al–Cu–Mn–Fe Alloy

Microstructure and Room Temperature Mechanical Properties of Hf and Sn-Doped Nb-20ti-5cr-3al-18si Alloy

Zr addition-induced transitions of deformation mechanism at high temperatures of Nb-Si-Ti based multi-alloys: Super-dislocations in γ-Nb 5 Si 3

Microstructure evolution and fracture toughness of Nb–Si–Ti based alloy with Cr, Mo and W elements addition

Effect of Zr addition on the microstructure, phase transformation and mechanical property of Ni 50 Mn 25 Ga 17 Cu 8 alloy

Composition control and heat treatment effect on characteristics of ZrNbTaHf x refractory high entropy alloys

Effect of Zr Element Addition on the Mechanical Behavior of Ti48.5-Xni49.5nb2 Alloy