Abstract:Ni–W–Co alloy is a recently developed single-phase Ni-based alloy with high density. An ultra-high content of W (35–38 wt%) is essential to ensure the high density but unfavorable to possess outstanding ductility or present large deformation. In this study, the flow stress behavior and hot workability of Ni–W–Co alloy were investigated through simulated compression tests with a temperature range of 1000–1300 °C and strain rate range of 0.01–5 s −1 . The Arrhenius-type constitutive equation at peak stress was established. The constitutive equation displays prediction bias due to the lower experimental values at low temperature and high strain rate. The ultra-high solution content of W not only results in the severely inhibited discontinuous dynamic recrystallization (DDRX) and high apparent deformation activation energy (568.5 kJ/mol) but also promotes the generation of subgrain boundaries. Furthermore, continuous dynamic recrystallization (CDRX) occurs during deformation at a low temperature and a high strain rate, which is quite different from the Ni-based alloy with a low W content that only DDRX occurs. The activation of CDRX shortens the stage at which work hardening dominates, and results in lower peak stress values. The prediction bias of the constitutive equation caused by the lower peak stress was eliminated through difference compensation. The hot processing maps at strain values of 0.3, 0.5, 0.7, and 0.9 were constructed. The optimal hot processing parameters of the Ni–W–Co alloy, which aims to obtain full recrystallization microstructure without defects, are strain rate 0.01–0.1 s −1 and temperature 1225–1300 °C in combination with the hot processing maps and microstructure evolution. This study provides a reference for the hot processing and microstructural modification of the novel Ni–W–Co alloy with an ultra-high W content.

Mechanical Response and Microstructural Evolution of Ni-27 W Alloys During Uniaxial Tension

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

Mechanical behaviors and microstructure evolution of Ni W medium heavy alloy at various strain rates under uniaxial tension

Theoretical Calculations of the Ideal Strength of Ni, NiAl and Ni3Al in Tension and Shear

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Strain hardening rate and strain rate sensitivity behavior of bcc/fcc-dual-phase tungsten heavy alloy

Making a Coherent L12-nano-precipitates-reinforced Ni-based Alloy Ultrastrong and Ductile by Constructing Dual Heterogeneous Structures

Revealing mechanical property–strengthening micro-mechanism of Ni/Ni3Al-based alloys by molecular dynamics simulation

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests

Anisotropic Mechanical Properties and Deformation Mechanisms of Nanotwinned Ni and Ni Alloys With Extremely Fine Twin Boundary Spacings

Effect of Tungsten Content on the Microstructure and Tensile Properties of Ni–xW–6Cr Alloys

Hot deformation behavior of a novel Ni–W–Co high-density Ni-based alloy with ultra-high W content

Unraveling the Deformation Behavior of the Fe45Co25Ni10V20 High Entropy Alloy

Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys

Mechanical Response and Deformation of Ni3al7 Alloys Using In-Situ Transmission Electron Microscopy Compression and Nanoindentation

Microstructure evolution and plastic deformation of Ni 47 Co 53 alloy under tension

Atomistic Simulation of the Mechanical Behavior of Ni3al Nanowires

Composition-dependent slip planarity in mechanically-stable face centered cubic complex concentrated alloys and its mechanical effects

Shear deformation mechanical performance of Ni–Co alloy nanoplate by molecular dynamics simulation

Ultra-strong nanotwinned Al-Ni solid solution alloys with significant plasticity.