Abstract:The physical and mechanical properties of rocks change significantly after being subjected to high temperatures, which poses safety hazards to underground projects such as coal underground gasification. In order to investigate the effect of temperature on the macroscopic and microscopic properties of rocks, this paper has taken sandstone as the research object and conducted uniaxial compression tests on sandstone specimens at different temperatures (20–1000 °C) and different heating rates (5–30 °C/min). At the same time, the acoustic emission (AE) test system was used to observe the acoustic emission characteristics of the rock damage process, and the microstructural changes after high temperature were analyzed with the help of a scanning electron microscope (SEM). The test results show that the effect of temperature on sandstone is mainly divided into three stages: Stage I (20–500 °C) is the strengthening zone, the evaporation of water and the contraction of primary fissures, and sandstone densification is enhanced. In particular, the compressive strength and elastic modulus increase, the macroscopic damage mode is dominated by shear damage, and the fracture micromorphology is mainly brittle fracture. Stage II (500–600 °C) is the transition zone, 500 °C is the threshold temperature for the compressive strength and modulus of elasticity, and the damage mode changes from shear to cleavage damage, and the sandstone undergoes brittle–ductile transition in this temperature interval. Stage III is the physicochemical deterioration stage. The changes in the physical and chemical properties make the sandstone compressive strength and modulus of elasticity continue to decline, the macroscopic damage mode is mainly dominated by cleavage damage, and the fracture microscopic morphology is of a more toughness fracture. The effect of different heating rates on the mechanical properties of sandstone was further studied, and it was found that the mechanical properties of the rock further deteriorated under higher heating rates.

Experimental Study on the Failure Process of Sandstone Subjected to Cyclic Loading and Unloading after High Temperature Treatment

Energy evolution and macro-micro failure mechanisms of frozen weakly cemented sandstone under uniaxial cyclic loading and unloading

Effects of high temperature on the mechanical behaviors of sandstone under true-triaxial unloading conditions

Experiment study of physical and mechanical properties of sandstone after variable thermal cycles

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

The impact of high temperature on mechanical properties and behaviors of sandstone

Experimental Study on Thermal Damage and Energy Evolution of Sandstone after High Temperature Treatment

Evaluation of Thermophysical and Mechanical Properties of Sandstone Due to High-Temperature

Damage deterioration mechanism and damage constitutive modelling of red sandstone under cyclic thermal-cooling treatments

Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions

Uniaxial compression tests on red sandstone specimens after different high-temperature processing and cooling time

Fracture properties and dynamic failure of three-point bending of yellow sandstone after subjected to high-temperature conditions

Experimental Study of the Mechanical and Acoustic Emission Characteristics of Sandstone by Using High-Temperature Water-Cooling Cycles

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

Experimental investigation on microstructure characteristics and deformation failure behaviors of sandstone after high temperature under Brazilian splitting

A Micromechanical-Based Failure Criterion for Rocks after High-Temperature Treatment

Experimental Investigation on Dynamic Mechanical Behavior and Fracture Evolution of Fissure-Filled Red Sandstone after Thermal Treatment

Study on the Failure Process and Acoustic Emission Characteristics of Freeze–Thawed Sandstone under Cyclic Loading and Unloading

Mechanical properties and energy evolution law of water bearing sandstone under cyclic loading

Mechanical characteristics of sandstone after high temperatures

Pore characteristics and mechanical properties of sandstone under the influence of temperature