Abstract:A six degree-of-freedom (DOF) motion control system for docking with a deep submergence rescue vehicle (DSRV) test platform was the focus of this study. The existing control methods can meet the general requirements of underwater operations, but the complex structures or multiple parameters of some methods have prevented them from widespread use. The majority of the existing methods assume the heeling effect to be negligible and ignore it, achieving motion control in only four or five DOFs. In view of the demanding requirements regarding positions and inclinations in six DOFs during the docking process, the software and hardware architectures of the DSRV platform were constructed, and then sparse filtering technology was introduced for data smoothing. Based on the adaptive control strategy and with a consideration of residual static loads, an improved S-plane control method was developed. By converting the force (moment) calculated by the controller to the body coordinate system, the complexity of thrust allocation was effectively reduced, and the challenge of thrust allocation in the case of a high inclination during dynamic positioning was solved accordingly. The automatic control of the trimming angle and heeling angle was realized with the linkage system of the ballast tank and pump valve. A PID method based on an intelligent integral was proposed, which not only dealt with the integral "saturation" problem, but also reduced the steady-state error and overshooting. Water pool experiments and sea trials were carried out in the presence of water currents for six-DOF motion control. The responsiveness and precision of the control system were verified by the pool experiment and sea trial results and could meet the control requirements in engineering practice. The reliability and operational stability of the proposed control system were also verified in a long-distance cruise.

Experimental study on the maneuvering derivatives of a half-scale SUBOFF model in the vertical plane

Study on rotating arm test of fully appended submarine and forces in single-plane

Hydrodynamic Coefficients of the DARPA SUBOFF AFF-8 in Rotating Arm Maneuver: Part I: Test Technology and Validation

Hydrodynamic Coefficients of the DARPA SUBOFF AFF-8 in Rotating Arm Maneuver - Part Ⅱ: Test Results and Discussion

The comparative research on the VPMM experiment and numerical simulation of the SUBOFF model

RANS analysis of manoeuvring hydrodynamic performance for a submarine in six degree of freedom motion

A 4-DOF Mathematical Model Approach

Time Domain Simulations of Ship Maneuvering and Roll Motion in Regular Waves Based on a Hybrid Method

Experimental investigation on a generic submarine hydrodynamic model considering the interaction effects of hull motion states and control planes

Numerical investigation of the hydrodynamics of a submarine with pump-jet propulsor in oblique sailing under wave-current coupling

Numerical Calculation and Model Test of Drag Performance and Hull Form Optimization on a Manned Submersible

Numerical Simulations of a Ship's Maneuverability in Shallow Water

Prediction of horizontal and vertical turning maneuvers of a generic submarine model by closed-form solutions and CFD

Numerical prediction for vertical dynamic anti-sinking performance of underwater vehicle

Ship maneuvering prediction based on virtual captive model test and system dynamics approaches

Numerical investigation of flow structures around the DARPA SUBOFF model

Rans-Based CFD Prediction of the Hydrodynamic Coefficients of Darpa Suboff Geometry in Straight-Line and Rotating Arm Manoeuvres

Numerical Simulation Study on the Recovery Process of Autonomous Underwater Vehicle

Simulation and experimental research on hydrodynamic performance of fully attached submarine in the surface and near the surface modes

A study on longitudinal motion stability of a variable-structure SWATH USV with and without twin hydrofoils

Design and Verification of Deep Submergence Rescue Vehicle Motion Control System