Abstract:A trans-media vehicle is a new type of equipment that can adapt to two environments, water and air, to maintain optimal hydrodynamic and aerodynamic performance. However, no matter what kind of trans-media vehicle, its dynamics are much more complicated when traversing the interface of the medium, as the parameters are time-varying due to the change in ambient medium and vehicle attitudes. In order to improve the stability and performance of the trans-media vehicle in complex environments, an accurate mathematical model is established to characterize the dynamics of the trans-media vehicle in this process in this study. The time-varying hydrodynamic coefficients with different attitudes or depths are obtained using computational fluid dynamics software. The mathematical model is solved iteratively using a Runge–Kutta solver to calculate the dynamic response. A prototype of trans-media vehicle is fabricated, and motion experiments are performed in the pool. The experimental results confirm the effectiveness of the established model and lay the foundation for further controller design, providing a reference for the dynamic modeling of other similar equipment operating in complex environments. The primary novelty of this study lies in the fact that the established dynamic model considers the complex interaction between the attitude of the trans-media vehicle and the inherent different properties of water and air and utilizes computational fluid dynamics software to accurately obtain time-varying coefficients under different attitudes and depths. This approach not only recognizes the criticality of orientation-dependent hydrodynamic coefficients but also incorporates their temporal variations, which were often overlooked in previous studies.

Numerical Calculation and Model Test of Drag Performance and Hull Form Optimization on a Manned Submersible

Analysis on the Numerical Simulation of Drag of a Manned Submersible

Numerical Calculation and Model Tests for Drag and Power Prediction of a Manned Submersible

The Shape Design Optimization Simulation of Quadrotor Unmanned Underwater Vehicle for Drag Reduction

Research on Hydrodynamics of Trans-Media Vehicles Considering Underwater Time-Varying Attitudes

Numerical Investigation of Microbubble Drag Reduction on an Axisymmetric Body Based on Eulerian Multiphase Model

Experimental and numerical simulation study of drag reduction on AUV grooved surfaces

Simulation and experimental research on hydrodynamic performance of fully attached submarine in the surface and near the surface modes

Numerical prediction for vertical dynamic anti-sinking performance of underwater vehicle

The comparative research on the VPMM experiment and numerical simulation of the SUBOFF model

RESEARCH ON DRAG REDUCTION CHARACTERISTICS OF UNDERWATER VEHICLE FORE REGION WITH SHORT GROOVE STRUCTURES

Numerical study of the hydrodynamic performances of surface piercing propeller

Numerical Simulation Study on the Recovery Process of Autonomous Underwater Vehicle

Scale effects on the hydrodynamic performance of a submerged body

Hydrodynamic Design of an Advanced Submerged Propulsion

Numerical Assessment of the Hydrodynamic Loads for a Manta Type Unmanned Underwater Vehicle: Oblique Towing Test

Experimental and Numerical Investigation of the Drag Coefficients of Subsea Tree

Numerical Analysis on Self-Propulsion of a Waterjet-Propelled Ship with Different Propulsion Models

Hydrodynamics of Semi-Submersible Vehicle Hulls with Variable Height-Width Ratio in Deep and Shallow Water

Multi-objective shape optimization of autonomous underwater vehicle by coupling CFD simulation with genetic algorithm

Numerical Analysis of The Drag Reduction Performance of a Double M-Ship Boat With Stepped Planing-Air Coupling