Abstract:Abstract Chemical flooding technique is one of effective EOR (Enhanced Oil Recovery) ways to improve the oil recovery for mature oilfield in China. It is usually applied successfully in low temperature and low salinity sandstone reservoirs, such as Daqing oilfield (45°C, 5,100 mg/L) and in Changqing oilfield (50°C, 4,700 mg/L). However, it is great challenges to develop chemical EOR formulations for the high temperature and high salinity carbonate reservoir. On the one hand, the high temperature and high salinity condition may cause decomposition of the conventional chemical agents with poor long-term stability. On the other hand, the oil types and compositions, rock surface property and pore structure are all different for sandstone and carbonate reservoirs. Therefore, it is necessary and important to development low cost and high efficiency chemical formulations for high temperature and high salinity carbonate reservoirs. In this paper, the betaine surfactant has been synthesized with cheap raw material of fatty acid, and its functional group of hydroxyl propyl sulfo hydrophilic group can improve the heat resistant and salt tolerant abilities; the star-polymer has been developed and the introduction of multi-functional monomer can inhibit the hydrolysis at high temperature and high salinity conditions. The new SP and ASP chemical formulations have been developed, and show good properties for high temperature and high salinity carbonate reservoir. The SP chemical formulations of the betaine and star-polymer show good heat resistant and salt tolerant capability. It could achieve ultra-low interfacial tension (less than 1.0×10-2mN/m) with temperature range from 30°C to 95°C, or salinity range from 5,000 mg/L to 220,000 mg/L.The effect of alkalis on interfacial tensions were studied, including Na2CO3, Na2SiO3, Na3PO4 and Na2B4O7. The ASP combination formulas with Na2B4O7 showed the best interfacial properties.The SP and ASP chemical formulations had good long term stability, and could maintain ultra-low IFT within 180 days, and the viscosity retention rates were greater than 90%.The dynamic adsorptions of this betaine were less than 1.0 mg/g rock, which can meet the requirement of field applications.After water flooding, the oil recoveries of the SP and ASP formulations increased about 22% (OOIP, Original Oil In Place) and the oil displacement efficiencies of chemical combination flooding reached to 75%. Excellent properties of chemical formulations with the sulfobetaine and star-polymer indicate that this EOR technology can be applied in high temperature and high salinity carbonate reservoir with or without alkaline.

Study on Reducing Injection Pressure of Low Permeability Reservoirs Characterized by High Temperature and High Salinity

JIN Zhiyuan1,2, SHAN Guorong2,3, PAN Pengju2,3

Smart Nanoparticles for Conformance Improvement in Waterflooding

Effects of Oilfield Injection Water Component on Rheological Characteristics of CTAC/NaSal Aqueous Solution

Synthesis and evaluation of depressurization and injection treatment agent suitable for low-permeability reservoirs

Research on the Water Injection Pressure Reducing and Increasing Injection System for Low Permeability Reservoirs in Fushan Oilfield

Impact of Ultra-Low Interfacial Tension on Enhanced Oil Recovery of Ultra-Low Permeability Reservoir

Improved Oil Recovery by Chemical Flood from High Salinity Reservoirs-Single-Well Surfactant Injection Test

Laboratory Experiment and Application Evaluation of a Bio-Nano-depressurization and Injection-Increasing Composite System in Medium–Low Permeability Offshore Reservoirs

Experimental Investigation on a Novel Polyelectrolyte Molecular Deposition Film for Improved Injectivity in Low-Permeability Reservoirs

A Novel Hydroxylpropyl Sulfobetaine Surfactant for High Temperature and High Salinity Reservoirs

The injection capacity evaluation of high-pressure water injection in low permeability reservoir: numerical and case study

Study on Chemical Combination Formulations for High Temperature and High Salinity Carbonate Reservoirs

A New Thermal Stable and Salt Tolerant Alkyl Polyether Benzyl Sulfonate Surfactant with Ultralow Interfacial Tensions for Enhanced Oil Recovery

A zwitterionic copolymer as fluid loss reducer for water-based drilling fluids in high temperature and high salinity conditions

Formulation Development of High Strength Gel System and Evaluation on Profile Control Performance for High Salinity and Low Permeability Fractured Reservoir

The Development and Field Application of Key Materials for Coupling Profile Control of Injection Well

Application of a Zwitterionic Hydrophobic Associating Polymer with High Salt and Heat Tolerance in Brine-Based Fracturing Fluid

Mechanism analysis of injection technique of water composition modification for enhanced oil recovery

Application Practice for Low Environmental Impact Deep Acidizing Process to Improve Injection Capacity of Water Injection Wells

A high salt tolerance and low adsorption drag reducer based on non-covalent enhancement