Abstract:Background: Chlorophenols (CPs) constitute a group of organic pollutants that are introduced into the environment as a result of several man-made activities, such as uncontrolled use of pesticides and herbicides, and as byproducts in the paper pulp bleaching. Promising removal technologies of chlorinated aromatics consist in the application of advanced oxidation processes (AOPs) that can provide an almost total degradation of a variety of contaminants. Among these, wide application find Fenton systems based on generation of reactive species having a high oxidizing power, such as hydroxyl radical HO*. Our objective was that of determining the overall degradation efficiency of the model compound 2,4-dichlorophenol (DCP) by thermal Fenton-type oxidation systems with a view toward defining in more details relevant process parameters, the effect of reaction temperature and of co-catalyst Cu2+. Methods: Reaction conditions were similar to those generally adopted as optimal in many practical applications, i.e. pollutant/Fe2+ (as FeSO4) ratio ca. 20, Fe2+/Cu2+ (co-catalyst) 2:1, pH adjusted and controlled at pH 3, and H2O2 in excess (up to four-fold over the stoichiometric amount required for complete mineralization). Results and discussion: The results demonstrate that it is advantageous to carry out the reaction at a temperature markedly higher (70 degrees C) than ambient. The stepwise addition of H2O2 in aliquots yields an efficient transformation, while allowing a convenient control of the reaction exothermicity. Under these conditions, the essentially complete removal of the initial DCP is accomplished using just one equiv of H2O2 during 15 min; excess H2O2 (5 equivalents) yields extensive substrate mineralization. Also relevant, at 70 degrees C dechlorination of the initial DCP (and of derived reaction intermediates) is remarkably extensive (3-5% residual TOX), already with the addition of 1 equiv of H2O2. At the end of the reaction, IC and IC-MS analyses of the solution reveal that only low-molecular weight carboxylic acid (acetic, formic, oxalic, malonic, tartaric, etc.) contribute to the residual TOC. Conclusions: The whole of the results herein point to the advantage of performing the process at temperatures substantially higher than ambient (70 degrees C). Under the conditions adopted, almost complete degradation of the initial toxic compound can be achieved using hydrogen peroxide in fair excess (e.g., 3.5 equiv H2O2). Recommendations and outlook: In applying practical Fenton-type degradation systems to heavily polluted wastes, either for the pre-treatment of waters with a high COD value prior to biodegradation or for complete mineralization of pollutants, the set up of appropriate reaction conditions appears to be a key factor. Also, it is desirable to keep the concentration of iron salts within the lower limits in order to minimize the production and disposal of iron oxide sludges.

Degradation of 2,6-Dichlorophenol by Ferrate (VI) Oxidation: Kinetics, Performance, and Mechanism

Experimental and theoretical study on Fe(VI) oxidative degradation of dichlorophen in water: Kinetics and reaction mechanisms.

Removal of 3,4-dichlorophenol from water utilizing ferrate(VI): Kinetic and mechanistic investigations, and effect of coexisting anions

Oxidative degradation of p-chlorophenol by ferrate(VI): Kinetics, intermediates and pathways

Ferrate(VI) Oxidation of Polychlorinated Diphenyl Sulfides: Kinetics, Degradation, and Oxidized Products

Mechanistic Insights into the Reactivity of Ferrate(VI) with Phenolic Compounds and the Formation of Coupling Products.

DEGRADATION OF 2,4-DICHLOROPHENOL IN VIS/FeEDTA/H_2O_2 SYSTEM UNDER BASIC CONDITIONS

Oxidative Degradation of Chlorpyrifos Using Ferrate(vi): Kinetics and Reaction Mechanism.

Fenton-like Degradation of 2,4-Dichlorophenol Using Fe3O4 Magnetic Nanoparticles

Efficient degradation of 2,4-DCP by bicarbonate-modified Fenton under near-neutral conditions

Insights into mechanisms of UV/ferrate oxidation for degradation of phenolic pollutants: Role of superoxide radicals

Kinetics and mechanisms of phenolic compounds by Ferrate(VI) assisted with density functional theory

Heterogeneous Electro-Fenton Using Modified Iron-Carbon As Catalyst for 2,4-Dichlorophenol Degradation: Influence Factors, Mechanism and Degradation Pathway

Kinetics and mechanism of diclofenac removal using ferrate(VI): roles of Fe3+, Fe2+, and Mn2

Degradation of the chlorophenols by ferrate

Kinetics and mechanism of diclofenac removal using ferrate(VI): roles of Fe 3+ , Fe 2+ , and Mn 2+

Practical applications of the Fenton reaction to the removal of chlorinated aromatic pollutants. Oxidative degradation of 2,4-dichlorophenol

Mixed Oxidation of Chlorophene and 4-Tert-butylphenol by Ferrate(vi): Reaction Kinetics, Cross-Coupling Products and Improved Utilization Efficiency of Ferrate(vi)

Efficient Degradation of 2,4-Dichlorophenol by Heterogeneous Electro-Fenton Using Bulk Carbon Aerogels Modified in Situ with FeCo-LDH As Cathodes: Operational Parameters and Mechanism Exploration.

Simultaneously degradation of 2,4-dichlorophenol and EDTA in aqueous solution by the bimetallic Cu-Fe/O₂ system.

Simultaneously degradation of 2,4-Dichlorophenol and EDTA in aqueous solution by the bimetallic Cu–Fe/O 2 system