Fault Location of Hybrid Three-Terminal HVDC Transmission Line Based on Improved LMD

Shuping Gao,Zhenxi Xu,Guobing Song,Mingxing Shao,Yuanyue Jiang

DOI: https://doi.org/10.1016/j.epsr.2021.107550

IF: 3.818

2021-01-01

Electric Power Systems Research

Abstract:To reduce the impact of traveling wave velocity, wave head recognition, and LMD (Local Mean Decomposition) end effect and mode mixing on location accuracy, this paper presents a fault location method based on improved LMD for hybrid three-terminal HVDC transmission lines, which is not affected by wave velocity. Firstly, the improved LMD is used to get the time when the fault traveling wave first arrives at the four measuring terminals. Then the fault branch is identified according to the ratio of the time of the fault traveling wave arriving at the measuring terminal. Finally, the equation is listed according to the principle of traveling wave location and the measurement equation which is not affected by the wave velocity is deduced. A hybrid three-terminal HVDC transmission system model is built by PSCAD to simulate various faults and output fault data under various fault conditions. MATLAB is used to process the fault data and verify the location algorithm. The simulation results show that the location method proposed in this paper is not affected by fault distances, fault types, infeed levels and transition resistances. In addition, it has higher accuracy than LMD based on CSI (Cubic Spline Interpolation) algorithm, wavelet packet location algorithm and double-ended location method of using wave velocity calculation.