Abstract:Computational methods were used to analyse the elasto-hydrodynamic lubrication of a complex rotor–bearing system. The methodology employed computational fluid dynamics (CFD), based on the Navier–Stokes equation and a fluid–structure interaction (FSI) technique. A series of models representing the system were built using the CFD–FSI methodology to investigate the interaction between the lubrication of the fluid film, and elastic dynamics of the rotor and journal bearing. All models followed an assumption of isothermal behaviour. The FSI methodology was implemented by setting nodal forces and displacements to equilibrium at the fluid–structure interface, therefore allowing the lubrication of the fluid and the elastic deformation of structures to be solved simultaneously. This is significantly different to the more common techniques—such as the Reynolds equation method—that use an iterative solution to balance the imposed load and the force resulting from the pressure of the fluid film to within a set tolerance. Predictions using the CFD–FSI method were compared with the results of an experimental study and the predictions from an ‘in-house’ lubrication code based on the Reynolds equation. The dynamic response of the system was investigated with both rigid and flexible bodies for a range of different bearing materials and dynamic unbalanced loads. Cavitation within the fluid film was represented in the CFD–FSI method using a simplified phase change boundary condition. This allowed the transition between the liquid and vapour phases to be derived from the lubricant’s properties as a function of pressure. The combination of CFD and FSI was shown to be a useful tool for the investigation of the hydrodynamic and elasto-hydrodynamic lubrications of a rotor–bearing system. The elastic deformation of the bearing and dynamic unbalanced loading of the rotor had significant effects on the position of its locus.

Author Response for "simulation and Experimental Study on Lubrication of High-Speed Reducer of Electric Vehicle"

Optimization of high-speed reducer in electric vehicle based on analysis of lubrication

Numerical simulation of flow and heat transfer in journal bearing lubrication

Simulation Analysis for Lubrication State of the Thrust Washer Within Straight Planetary Gear Set

Investigation of the Lubrication System in a Vehicle Axle: Numerical Model and Experimental Validation

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Analysis and simulation of the influence of initial liquid level on lubricating flow state and oil-churning resistance moment of planetary reducer

Multi-objective optimization of lubricant volume in an ELSD considering thermal effects

Lubrication Analysis of Journal Bearing and Rotor System Using Cfd and Fsi Techniques

Study on the influence of key design parameters on lubrication characteristics of a novel gear system applying Taguchi method

Lubricating Simulation Analysis of Connecting Rod Bearing Based on AVL-EXCITE

Analysis of mixed lubrication of RV reducer turning arm roller bearing

Application of Computational Fluid Dynamics and Fluid–Structure Interaction Method to the Lubrication Study of a Rotor–Bearing System

Investigation of the lubrication system in a vehicle axle: Optimization and experimental validation

A Comparative Study on Simulation and Experiment of Oil-Air Lubrication Unit for High Speed Bearing

Author Response for "an Adjustable Oil Film Thickness Test Rig for Detecting Lubrication Characteristics of Slipper/swash-Pair in Piston Pumps"

Investigation of hydrodynamic lubricant film breakdown between the journal and bearing in a high-speed coolant pump of electric vehicles

Friction assessment of ultralow viscosity lubricant formulations based on a validated elastohydrodynamic simulation

Analysis on the Lubrication Performances of Journal Bearing System Using Computational Fluid Dynamics and Fluid–structure Interaction Considering Thermal Influence and Cavitation

Lubrication mechanism in gearbox of high-speed railway trains