Abstract:Thin-ply composite failure modes also significantly differ from conventional ply composite failure modes, with the final failure mechanism switching from irregular progressive failure to direct fracture characterized by a uniform fracture with the reduction of the ply thickness. When open holes and bolt joints are involved, thin-ply-laminated composites exhibit more complex stress states, damage evolution, and failure modes. Compared to the experimental study of thin-ply-laminated composite-bolted joints, there are few reports about numerical analysis. In order to understand the damage evolution and failure mechanism of thin-ply-laminated composites jointed by single-lap bolt, a progressive damage model based on three-dimensional (3D) LaRC failure criterion combined with cohesive element is constructed. Through an energy-based damage evolution method, this model can capture some significant mechanical characteristics in thin-ply-laminated structures, such as the in situ effect, delamination inhibition, and fiber compressive kinking failure. The comparisons between the numerical predictions and experimental observations are made to verify the accuracy of the proposed model. It is found that the predicted stress-displacement curves, failure modes, damage morphologies, etc., are consistent with the experimental results, indicating that the presented progressive damage analysis method displays excellent accuracy. The predicted stress at the onset of delamination is 50% higher than that of the conventional thick materials, which is also consistent with experimental results. Moreover, the numerical model provides evidence that the microstructure of thin-ply-laminated composite performs better in uniformity, which is more conducive to inhibiting the intra-layer damage and the expansion of delamination damage between layers. This study on the damage inhibition mechanism of thin-ply provides a potential analytical tool for evaluating damage tolerance and bearing capabilities in thin-ply-laminated composite-bolted joints.

Mechanical performance and damage behavior of delaminated composite laminates subject to different modes of loading

Delamination Propagation Manipulation of Composite Laminates under Low-Velocity Impact and Residual Compressive Strength Evaluation

Delamination Propagation and Compressive Strength Prediction of Laminated Composite

Tensile Progressive Damage and Compressive Postbuckling Analysis of Open-Hole Laminate Composites

Analysis of Residual Compressive Strength of Composite Laminates with Delamination

The Compressive Behavior of CFRP Laminates with Delamination of Different Shapes Using Numerical and Experimental Approaches

Status of Numerical Simulation Methods for Delamination Damage of Composite Laminates

Exploration of Several Influence Factors of Low-Velocity Impact Damage on Composite Laminates

A progressive failure model for composite laminates with initial delamination under compressive loading

Compressive Failure Analysis for Low Length-Width Ratio Composite Laminates with Embedded Delamination

Application of a delamination model to laminated composite structures

Experimental and Numerical Study on the Mode I Delamination Toughness of Z-Pinned Composite Laminates

Parameter Studies and Evaluation Principles of Delamination Damage in Laminated Composites

An Analytical Model for Evaluating the Buckling, Delamination Propagation, and Failure Behaviors of Delaminated Composites under Uniaxial Compression

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Study on compressive properties of composite laminates with edge rectangular delamination defect

The effect of delamination on damage behavior of composite laminates subjected to three-point bending

Static Strength Analysis of Composite Laminate Based on Delamination Damage Model

Residual strength and failure mechanism of CF/PPS composites with delamination damage

A numerical model on compressive behavior of cfrp laminate with a designed delamination

Post-Buckling Response of Carbon/Epoxy Laminates with Delamination under Quasi-Static Compression: Experiments and Numerical Simulations