Macro–Microstatic Stiffness Prediction Model of Metal Rubber

Chuanbing Zhang,Hongrui Ao,Hongyuan Jiang

DOI: https://doi.org/10.1002/adts.202100008

2021-01-01

Advanced Theory and Simulations

Abstract:An accurate prediction to the macro-microstatic stiffness of metal rubber (MR) is necessary when introduced into the novel hybrid metal rubber-bump foil bearings (HMR-BFBs) as the supporting components. However, the deficiency in theoretical models describing the static stiffness limits MR's engineering applications. This study presents theoretical and experimental characterization for the mechanical properties of MR samples. The microstatic stiffness prediction models are proposed based on the radial and axial deformation mechanisms of helix wire units. The constitutive static stiffness model for predicting the macromechanical properties of MR samples is developed with consideration of the separation state, the sliding contact state, and the extrusion contact state between the metal wires based on the force interaction and the Coulomb friction. Moreover, an orthogonal experiment is designed, and subsequently the static stiffness tests of MR samples are carried out. Based on static stiffness tests, a semiempirical stiffness model with consideration of the material and process parameters, including the relative density of MR samples, the wire diameter, and the Young's modulus of metal wires is developed. Results show a good agreement between the theoretically predicted and experimental static stiffness of MR specimens with a correlation index R-2 of 0.9692.