Abstract:To separate Mo(VI) and Zr(IV) ions from a 0.5 M oxalic acid solution and from each other, a novel macroporous silica-based N,N,N′,N′- tetraoctyl-3-oxapentane-1,5-diamide (TODGA) chelating polymeric adsorbent (TODGA/SiO 2 -P) was synthesized by introducing the TODGA molecule into ca. 50-μm diameter SiO 2 -P particles by impregnation. The adsorption of Mo(VI) and Zr(IV) ions onto TODGA/SiO 2 -P was investigated by examining the influence of nitric acid and oxalic acid concentrations. It was found that the adsorption was strongly affected by increasing the HNO 3 concentration from 0.5 M to 9.0 M either with or without the addition of 0.5 M H 2 C 2 O 4 . In the absence of 0.5 M H 2 C 2 O 4 , the distribution coefficients (K d ) of both Mo(VI) and Zr(IV) ions decreased with an increase in the HNO 3 concentration from 0.5 M to 3.0 M, increased slowly when the concentration of HNO 3 was increased further from 3.0 M to 6.0 M, and then increased gradually above 6.0 M concentration. Furthermore, the adsorption of Zn(IV) ions onto TODGA/SiO 2 -P was considerably greater than that of Mo(VI) ions. In the presence of 0.5 M H 2 C 2 O 4 , Zr(IV) ions showed no adsorption at HNO 3 concentrations below 4.0 M, being partly adsorbed in the presence of 4.0–6.0 M HNO 3 and fully adsorbed when the HNO 3 concentration was greater than 6.0 M. In contrast, Mo(VI) ions showed a much lower adsorption at HNO 3 concentrations below 2.0 M and no adsorption above this acid level. In the presence of HNO 3 at a concentration above 6.0 M and containing 0.5 M H 2 C 2 O 4 , the adsorption of Zr(IV) ions overlapped that from a similar HNO 3 solution which did not include 0.5 M H 2 C 2 O 4 . This was attributed to complete protonation of the C 2 O 2− 2 anion. On the basis of batch experiments, Mo(VI) and Zr(IV) ions were separated from a 6.5 M HNO 3 solution containing 0.5 M H 2 C 2 O 4 by means of a column packed with TODGA/SiO 2 -P at 50°C. The separate components, Mo(VI) and Zr(IV), could be effectively separated from each other by eluting with some selected eluants. The recovery percentage was 100.5% for Mo(VI) ions and 96.8% for Zr(IV) ions.

Selective Adsorption of Molybdenum Ions on Ionic Liquid-Loaded Resin Containing 1-Butyl-3-methylimidazolium(2,4,6-trimethyl)benzodithioate

Adsorption and Chromatographic Separation of Mo(VI) and Zr(IV) Ions from a High-Concentration Oxalic Acid Solution by a Macroporous Silica-Based N,N,N′,N′-Tetraoctyl-3-Oxapentane-1,5-Diamide Polymeric Adsorbent

Properties and Mechanism of Molybdenum and Zirconium Adsorption by a Macroporous Silica‐Based Extraction Resin in the MAREC Process

Synthesis of a Novel Silica‐Based Macroporous Polymer Containing TODGA Chelating Agent and Its Application in the Chromatographic Separation of Mo(VI) and Zr(IV) from Diethylenetriaminepentaacetic Acid

Adsorption of Cesium and Some Typical Coexistent Elements Onto a Modified Macroporous Silica-Based Supramolecular Recognition Material.

SPEC Process III. Synthesis of a Macroporous Silica-based Crown Ether-impregnated Polymeric Composite Modified with 1-Octanol and its Adsorption Capacity for Sr(II) Ions and Some Typical Co-existent Metal Ions

Adsorption Behavior of Sr(II) and Some Typical Co‐existent Metals Contained in High Level Liquid Waste Onto a Modified Macroporous Silica‐Based Polymeric DtBuCH18C6 Composite

Molybdenum Separation from Sodium-Tungstate-Molybdenum Aqueous Solutions Using an Anionic Gel-Based 201 × 7 Resin

Adsorption of divalent heavy metal ions onto IDA-chelating resins: simulation of physicochemical structures and elucidation of interaction mechanisms.

Selective adsorption of uranium(VI) from aqueous solutions using the ion-imprinted magnetic chitosan resins

Separation of Mo(VI) from U(VI) and Other Fission Elements in Synthetic Solutions by Di-Quinolinol Chelating Ligand in [c4mim][ntf2] Ionic Liquid

Synergistic adsorption behavior of a silica-based adsorbent toward palladium, molybdenum, and zirconium from simulated high-level liquid waste

Fabrication of Uio-66-NH2 with 4,6-Diamino-2-mercaptopyrimidine facilitate the removal of Pb2+ in aqueous medium: Nitrogen and sulfur act as the main adsorption sites

Constructing Hydroxyoxime-Functionalized Ionic Liquid [bhib][ntf2] for the Separation of Mo(VI) from U(VI)

Targeted elimination of molybdenum ions from a leaching solution with the ability of radiated grafting GMA-PAN nanofibers

Recovery and separation of Mo(VI) and Re(VII) from Mo-Re bearing solution by gallic acid-modified cellulose microspheres

[BMIM][X] Ionic Liquids Supported on a Pillared-Layered Metal-Organic Framework: Synthesis, Characterization, and Adsorption Properties

Efficient Sorption of Mo(VI) from a Synthetic Solution of Uranium and Several Fission Elements on 8-Quinolinol Grafted Silica

Amphiphilic ligand in situ assembly of uranyl active sites and selective interactions of molybdenum disulfide

Advancing wastewater treatment and metal recovery: Aminated ZIF-8 composite cellulose aerogel as an innovative biomass adsorbent for enhanced molybdenum ion adsorption

Selective Adsorption of Lead (ii) Ions by A Manganese Dioxides-Loaded Adsorption Resin